Welcome to B2BAGE
spirally wound gasket
spirally wound gasket

Minimum Order: 0
Quality/Safety Certification: 0.00


spirally wound gasket is suitable
for sealing spots where the
alteration of temperature
and pressure are frequent.

spirally wound gasket

Specification:

QS 3051 also can be processed for inner and outer ring of spiral wound gasket. We make the inner and outer ring by punched for size small then 14 inch, and by lathe for large sizes. If some material is costly, for example SS304, SS316 etc., we can make it by bending and welding with low cost, if the seal face is narrow.

Construction:

QS  3051 is machined from solid metal sheet in a round shapes and designed for high pressure, high temperature or highly corrosive applications by selecting the most suitable material. It is designed to withstand exceptionally high assembly loads over a small area

QS  3051 also can be processed for inner and outer ring of spiral wound gasket.

QS  have enough homemade special groover and angling machines for making inner and outer rings of SWG with good efficiency and lower cost.

Available:

Size:
ASME B 16.20
1/2 to 24
150LB, 300LB, 600LB
Other Sizes or standard on request
Materials:
Carbon Steel, with or without zinc coating
SS304, SS304L, SS316, SS316L
Other special materials:
SS321, SS317L, Duplex 31803,
Ti, Ni, Inc, Hast. Monel, Zr. etc

Ordering example

Inner and outer ring , Material: SS304
2 150LB

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.