Our fingertip oximeter can be used to measure human Homoglobin staturation and heart beat through finger.

Features

1.The device can accurately measure SpO2 and pulse rate in a +_2% tolerance.

2.The device will power off automatically without the signal for 4 seconds.

3.Two AAA size batteries are required for operating, and the continuous working time
is 12 hours.

4.When Low-Voltage Warning is shown on screen and the malfunction may be caused.
5.The device is so light that its weight with batteries is about 50g.

Specification

A. Display model 64k color OLED Display

SpO2 display: 35%-99%,

Pulse rate display: 30bpm-240bpm,

Pulse wave intensity display: 15-segment bar-graph display

Low Battery voltage indication: Segment OLED Signal

B. Power supply requirement: 1.5V (AAA size) alkaline batteries +_2%C.

Operating current: 60mAD.

Resolution:

SpO2+_1%Pulse Rate:+_1bpmE.

Accuracy: S

pO2 +_2% (during 70%-99%)No definition (<70%)

Pulse Rate:+_%2bpm

F. Measurement at low perfusion:

The values of SpO2 and pulse rate can be displayed properly when pulse saturation is at 0.5%.G.

Resistance to surrounding light:

The difference between the value measured in the condition of indoor natural light and that of darkroom is less than +_1%.

H. Resistance to interference of man-made light:

The difference between the value measured in the condition of man-made light and that of darkroom is less than +_1%.

I. Automatic shutdown function:

The device will power off automatically in 4 seconds when there is no finger in the
device.

Dimension: 58(L) x 32(W)x 34(H) mm

Weight: 50g (including 1.5V (AAA size) alkaline batteries x 2)

Environment requirements:Temperature:

Operating Temperature: 10 centigrade to 40 centigrade

Storage Temperature: -20 centigrade to 55 centigrade

Humidity:Operating Humidity: 35%-80%Storage

Humidity: 10%-100%Atmospheric pressure:

Operating Pressure: 70kPa-106kPa

Storage Pressure: 50kPa-106kPa