Welcome to B2BAGE
Refrigerator U shape panel Rolling & Forming Line
Refrigerator U shape panel Rolling & Forming Line

Minimum Order: 0
Quality/Safety Certification: 0.00


refrigerator
side panel
PCM or metal sheet
easy maintenance.

 

General Technical Data

             

Outer dimension:                 48000×3500×2000mm(L×W×H)

                

Working surface height:            900mm above the ground

                                

Station:                           9

             

Formed Width:                    400~650 mm

            

Formed Length:                   1000~2000 mm

                        

Cycle time:                        20 s/set

                       

Sheet material:                   cold rolled plate,pre-painted plate or PCM with film

                                 

Sheet thickness:                   0.45~0.6mm

                  

Total power:                      ~50Kw

                   

Total air supply:                   ~2m3/h

                          

Industrial water:                   ~10 m3/h

 

The line is applied to forming set of side panel. It mainly consists of loading station, punching station, 180º overturning station, rolling station, cutting station, bending station, 90º bending station, flanging station, unloading station, pneumatic unit, hydraulic unit, electric control unit, etc. Except the double panels (right+left) production, this line is compatible for single panel.

Working procedure: loading automatically, punching, sheet turning, rolling, foamig, cutting, stage foaming, end-bending, unloading and so on.

 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.