Non-woven geotextiles
Minimum Order: 0
Quality/Safety Certification: 0.00
non-woven geotextiles
PET Continuous filament spunbond needle punched nonwoven geotextiles.
PET Continuous filament spunbond needle punched nonwoven geotextiles.
Properties
Anti-aging, Acid and Alcali resistance, abrasion resistance, good flexibility and easy for construction.
Applications
Used in the areas of highway, railway, dyke, water project construction, tunnel for its reinforcement, filtration, isolation and drainage.
Packing size
Width:6.0-6.6m; Length:50-100m
Test Item/Unit/No. | HY350 | HY400 | HY450 | HY500 | HY550 | HY600 | Test Method | ||
Mechanical Properties | |||||||||
Tensile Strength | CD | kn/m | 21.5 | 23.5 | 25.5 | 28 | 30 | 32 | ASTM D 4595 |
MD | 26 | 29 | 31 | 34 | 36 | 38 | |||
Elongation at maximum load | CD | % | 60 | 60 | 60 | 60 | 60 | 60 | |
MD | 59 | 59 | 59 | 59 | 59 | 59 | |||
Grab Strength | CD | kn ≥ | 1.6 | 1.73 | 1.95 | 2 | 2.2 | 2.4 | ASTM D 4632 |
MD | 1.87 | 2.13 | 2.4 | 2.27 | 2.5 | 2.7 | |||
Grab Elongation | CD | % | 60 | 61 | 61 | 62 | 63 | 64 | |
MD | 53 | 54 | 54 | 55 | 56 | 57 | |||
Trapezoidal Tear | CD | kn ≥ | 0.68 | 0.71 | 0.78 | 0.81 | 0.89 | 0.97 | ASTM D 4533 |
MD | 0.85 | 0.81 | 0.92 | 1.21 | 1.33 | 1.44 | |||
Burst Strength-CBR plunger method | kn ≥ | 3.85 | 4.5 | 4.95 | 6.55 | 7.2 | 7.86 | ASTM D 6241 | |
Puncture resistance | n ≥ | 760 | 850 | 980 | 1050 | 1200 | 1300 | ASTM D 4833 | |
Mullen Burst | Mpa | 3.9 | 4.3 | 4.8 | 5.2 | 5.7 | 6.3 | ASTM D 3786 | |
Cone drop resistance(hole-Φ)Dynamic perforation diameter | mm | 15 | 12 | 11 | 10 | 9 | 8 | BS EN 918-1996 | |
Hydraulic Properties | |||||||||
Flow Rate,Q100 | L/s/m² | 130 | 120 | 110 | 100 | 90 | 80 | ASTM D 4491 | |
Permeability | cm/s | 0.33 | 0.31 | 0.3 | 0.3 | 0.29 | 0.28 | ||
Apparent Opening Size O95 | mm ≤ | 0.1 | 0.09 | 0.08 | 0.075 | 0.07 | 0.065 | ASTM D 4751 | |
Apparent Opening Size O90 | mm ≤ | 0.08 | 0.08 | 0.07 | 0.075 | 0.07 | 0.065 | ||
Physical Identification Properties | |||||||||
Thickness 2KPa | mm | 3.5 | 3.7 | 3.9 | 4.4 | 5 | 5.5 | ASTM D 5199 | |
Mass per unit area | g/m² | 350 | 400 | 450 | 500 | 550 | 600 | ASTM D 5261 | |
Width | m | 2/3/6/ | 2/3/6/ | 2/3/6/ | 2/3/6/ | 2/3/6/ | 2/3/6/ |