golf glove, China golf glove Supplier,Factory

golf glove

Huzhou Ruibang Glove Co., Ltd. [China]

Minimum Order: 0

Quality/Safety Certification: 0.00

sheepskin Palm
sheepskin Back with Printing
Spandex finger

CE golf glove

Dear Mr/s.,

We are manufacturers of golf gloves with high quality and competitive price. Our company is located in Huzhou Balidian Industry Zone, in the center of Shanghai, Suzhou and Hangzhou three cities with convenient traffic and good communications, it's about only 1.5 hours away from Shanghai airport.

RuiBang Gloves owns many customer's trust by our purpose of " 3 first": "Quality is first, Credibility is first, Customer is first" Our gloves are welcomed by the Europe, United States and Japan Markets. RuiBang will always be in the leading of market by our virtue, honest and credit. Welcome the worldwide customers to visit our factory. We will supply you our best service.

If you have any question, please feel free to contact me. Thanks!

CE standard

EN 388

Gloves giving protection from mechanical risks

Protection against mechanical hazards is expressed by a pictogram followed by
four numbers (performance levels), each representing test performance against a specific hazard.

1 Resistance to abrasion
Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove. See table below.

2 Blade cut resistance
Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 4.

3 Tear resistance
Based on the amount of force required to tear the sample.
The protection factor is then indicated on a scale from 1 to 4.

4 Puncture resistance
Based on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 4.

If some of the results are markt with a X means that this test performance is not tested. If some of the results are markt with a O means that the glove did not pass the test.

Test	Performance level
	1	2	3	4	5
Abrasion resistance (cycles)	100	500	2000	8000
Blade cut resistance (factor)	1,2	2,5	5	10	20
Tear resistance (newton)	10	25	50	75
Puncture resistance (newton)	20	60	100	150

EN 420

This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose, safety, etc

· The gloves themselves should not impose a risk or cause injury.

· The pH of the gloves should be as close as possible to neutral.

· Leather gloves should have a pH value between 3.5 – 9.5.

· The highest permitted value for chromium is 3 mg/kg (chrome VI).

· Specific details of any substance used in the glove which is known to cause allergies

· Sized by reference to an agreed common European hand size, for example minimum length.