1.Diameter:35-300mm
2.Length:550-2200mm
3.Compressive Strength:20-55MPa
4.Bending Strength :10-30MPa
5.Elastic Modulus :9-21
Graphite Rod
Electrodes, anodes, cathodes, heating elements, resistors, fluxing/degassing tubes, molds, crucibles, special structural parts
Production
Raw material: high quality petroleum coke.
Extruded, baked, impregnated and graphitized under precise technical control.
Applications
Electrodes, anodes, cathodes, heating elements, resistors, fluxing/degassing tubes, molds, crucibles, special structural parts, etc. in metallurgy, mechanical engineering, chemical & electrochemical industry, energy management, glass & ceramics, transportation and other industries.
Programmable properties
Medium and/or fine grain
High density and high mechanical strength
High thermal and chemical resistance
High resistance to thermal shock
Proper electrical conductivity
Minimum wettability to molten metals and glass
Typical Sizes
Diameter (mm) 35,40,45,50,60,75,100,120,150,175,200,250,300
Length (mm) 550 — 2200
Other diameters and lengths are available on request.
Specifications
| Specifications | ||
| Bulk Density | g/cm3 | 1.65-1.80 |
| Compressive Strength * | MPa | 20-55 |
Bending Strength * | MPa | 10-30 |
Elastic Modulus * | GPa | 9-21 |
Specific Resistance * | μ Ω·m | 5.0-15.0 |
Ash | % | 0.05-0.5 |
Measured in longitudinal direction.
The values mentioned in this table are only for reference and not committed to any contract
Contact:Doris Zhou
Dalian Thrive Mining Co., Ltd.
Tel: 86-411-84357743
Fax: 86-411-84342356
