surface grinding machine:
1) CE standard.
2) Bring transmission by synchronous belt
3) ISO
4) Veneer case packing
Hydraulic surface grinding machine:
1,Adopt the exceeding precise class7(P4 level) ball bearing for spindle.
2,Hydraulic system of table longitudinal movement.
Technical Parameters | Unit | MY1224 | MYS1224 | |
Max.workpiece to be Ground | mm | 630×310×390 | 630×310×390 | |
Max. Grinding Length | mm | 630 | 630 | |
Max. Grinding Width | mm | 320 | 320 | |
Distance From Table Surface To Spindle Center | mm | 550 | 550 | |
Slide way |
| V-type rail with Steel-ball | V-type rail with Steel-ball | |
V-type rail with Steel-ball | Kg | 200 | 200 | |
Table Size (L×W) | mm | 600×300 | 600×300 | |
Number of T -Slot | mm×n | 14×1 | 14×1 | |
V-type rail with Steel-ball | m/min | 3-20 | 3-20 | |
Cross Feed On Handwheel | mm | 0.02/Graduation 2.5/revolution | 0.02/Graduation 2.5/revolution | |
Vertical Feed On Handwheel | mm | 0.01/Graduation 1.25/revolution | 0.01/Graduation 1.25/revolution | |
Wheel Size (dia×width×bore ) | mm | 200×20×31.75 | 200×20×31.75 | |
Spindle Speeds | 50Hz | rpm | 2850 | 2850 |
| 0-6000 | 30-6000 | ||
Totale Power | Kw | 3.79 | 2.5 | |
Spindle Motor | Kw | 2.2 | 2.2 | |
Working Pressure | Mpa | 3 | 3 | |
Max.Capacity | L/min | 20 | 20 | |
Minimum Of Numerical | L | 80 | 80 | |
Surface Roughness | μm | Ra0.63 | Ra0.63 | |
Paraller Level | mm | 300:0.005 | 300:0.005 | |
Machine Size (L×W×H) | mm | 1900×1530×1830 | 1900×1530×1830 | |
Packing Size (L×W×H) | mm | 1980×1530×2030 | 1980×1530×2030 | |
Gross,Net | T | 1.2,1.33 | 1.1,1.2 | |
