1.a high-end corn harvester
2.with fast hitching design
3.corn harvester equipped with 159HP engine
4.with sufficient power
Equipped with 159HP engine, with sufficient power reserve; Adopt the advanced low-angle extended four-line header made in North America, with line width of 650mm, it harvests corns with 600-700 line width. It is suitable for corn planters in northern China. Horizontal stalk roller and plate type stripper structure, adjustable stalk divider, with good stripping effect and small damage of grain. Adopt secondary conveying method, improving ground clearance, ensuring passing ability and enhancing flexibility of header elevation.
Horizontal stalk roller and plate type stripper structure, adjustable stalk divider, with good stripping effect and small damage of grain. Adopt secondary conveying method, improving ground clearance, ensuring passing ability and enhancing flexibility of header elevation. Folded-plate type rigid-structural chassis, compact in structure, solid and durable; Peeling roller adopts parallel small-inclination corresponding arrangement of cast iron roller and rubber roller, which effectively realizes peeling and reducing the percentage of broken grain. The peeler is featured by good peeling effect, high peeling ratio, large treatment capacity, and strong reliability. Under the peeler, there is grain recovery plant to reduce loss of grain. Equipped with extra large granary with capacity of 4.3m3, improving working efficiency; Fast hitching design of header and axle. Adopt 1000 serial front axle, with advanced technology, strong load bearing, high reliability. It realizes unilateral brake. It is featured by strong adaptability, flexible steering and convenient maintenance. Humanistic cab design. Hydraulic handle operates flexibly and freely; adjustable seat and adjustable steering wheel rudderpost; optioned air conditioner and fan heater. “Man-machine” design concept makes your riding more safe and comfortable.
The main parameters
Item |
Unit |
Parameter |
Total Mass |
kg |
9000 |
Working Spacing |
4 | |
Spacing range for |
mm |
650 |
Front Tread |
kpa |
2000 |
Rear Tread |
mm |
1950 |
Minimum ground clearance |
mm |
400 |
Unloading height of lowest |
mm |
2100 |
Capacity of Tanker |
L |
4300 |
Fan diameter |
mm |
400 |
Engine Model |
6110/125ZT | |
LWH |
mm |
9300×3050×3800 |
