battery LCD screen and usb pass-through
More than 10 colors available
Battery working voltage: 3.2v-3.7v-4.2v
black,white, silver, pink, red, titian, red, green, gold, copper, blueHot sell ego-vv (variable voltage) starter kits
Hot sell ego-vv (variable voltage) starter kits electronic cigarettes Components included:
2 X ego-T atomizers
2 X 650mah batteries—LCD screen battery or pass-through
1 X wall charger ,1 X usb charger cable/extension usb cable
5 X cartridges
1X Gift box
1X Pouch
1X English instruction
Hot sell ego-vv (variable voltage) starter kits electronic cigarettes Specifications:
1. Ego-vv electronic cigarette total length: 132mm, diameter: 14mm
2. Ego-vv battery capacity: 650mah, working voltage: 3.2v-3.7-4.2v
3. ego-vv Battery indicator: Red/3.2v Red & Blue/3.7v Blue: 4.2v
3. The battery life of the ego-vv electronic cigarette: 300 recharging
4. ego-vv electronic cigarette charging time: 2-2.5 hours
5. ego-vv each cartridge: 300-450 puffs
Aftersale Service:
1. Warranty: 12 months for battery, 6 months for atomizer
2. Give replacements if there is quality problem of the part
3. Evaluate the customs risk and choose safest shipping company during different period
4. Follow status up time by time until the goods arrive client's hand
Extra Service:
1. Design client's LOGO on the battery and gift box (for OEM)
2. Design the box and cigarette based on customer's device (for ODM)
How to Adjust Vapor Volume:
1. by default, the battery is at low voltage status when you get it, the indicator ring light below the button is red.The vapor volume is the lowest when you smoke it.
2. Based on the status of low voltage, press battery button 5 times within 2 seconds, the indicator ring light will turn red to pink. Now the battery is in the status of medium voltage, vapor volume has increased too.
3. Based on the status of medium voltage, press battery button 5 times within 2 seconds, the indicator ring light will turn pink ot blue. Now battery is in the status of high voltage, vapor volume reaches a maximum.
Advantages:
1. Vapor volume can be adjusted by oneself, it can meet different needs from different customers
2. You can know battery power state any time.
3. At the bottom of battery, there is a LED display screen to show remaining power. 5 light grids are red in LED display screen when the battery is with adequate power. Grid will turn off to show some of power having been used out. By the same logic, when just one grid left shows red, you need to make a preparation of recharging
Charging your 688
688 uses a 3.7-volt 650mAH rechargeable battery with a power-saving/safety activation button that conserves energy by accessing the battery only when pressed. 688 battery contains a microchip to prevent the lithium ion cell from overcharging. The charger will automatically stop when the battery becomes fully charged.
To charge the battery, screw the battery into the USB charger cable. Plug the USB charger cable into the USB wall charger or a computer. Allow the first charge to last approximately 8 hours. The LED on the battery will emit a green light to indicate a full charge and a red light to indicate a low charge. The 688 battery yields approximately 750 to 800 puffs per charge. The battery may be charged up to 300 times. After 300 charging cycles, the battery’s performance may degrade over time.
How to Assemble Your 688:
To assemble your 688, screw the battery clockwise onto the atomizer and secure firmly. Gently insert a filled tank into the atomizer chamber. Secure the tank firmly in order to puncture the base of the tank and allow e-liquid to flow freely. To prevent damage, do not force the tank cartridge into the atomizer.
How to Use Your 688:
Push and hold the LED button on the battery compartment to activate the 688. While holding the button, inhale from the tank’s mouthpiece. Release the button after inhaling. Holding the button too long may cause overheating and damage the 688. Do not use your 688 in a upside down vertical position, as liquid may leak through the chamber.
Battery & Charger
it is better to charge the 688 battery with a original charger, 688 charger is compatible to EGO series charger. Do not charge the battery near a high temperature heat source. Do not weld or pierce the battery. If the battery appears discolored or deformed, or if it emits an irregular amount of heat or unusual odor, immediately remove the battery from the 688 or the USB charger and suspend use. Keep the 688 and it’s components from the reach of children or animals. Do not store the battery in a hot, humid, or damp environment. The input voltage of the USB wall charger is AC100-240V 50/60Hz. The input voltage of the USB computer cable is DC 5V, 500mah and the output voltage is 4.2V 420mah. Ensure that local voltage specifications are in accordance with our USB charger and charger cable.
