1.High quality,natural rubber material
2.Obtained CE ISO13485 FDA ISO9001
3.Comfortable and sofety
4.Home healthcare
Applicability
It is used for Medical treatment company,family,gerocomium and the patients care and the prevention of the bedsore of the patients in bed in long terms.
Installation and Usage
1.Please keep the controller away from the head of the patient.
2.Put the mattress on the bed with the air pipe on the inner side,the fixed collar of the mattress should be fixed with the bed.
3.Put the two outside tubes respectively on the gas outlets of the controller,when installation,do not reverse the tubes back and forth.
4.Connect the controller with the power and turn on the switch,and turn the adjustable gas knob at the maximum place.After 20 mins later,turn the knob at the right place according the patient condition.
5.The sheet ,mat and soft cushion may be put on the mattress when using.The bedsore patient can only use the sheet,and the mat instead for prevention of the bedsore.the hard and the airtight articles are forbidden.
Care and Maintenance
1.Clean the mattress gently with banister brush and neutral washing and use it after drying
2.The attaching plug should be pulled out when cleaning the controller,the wet cloth will be ok.
3.The controller should be in shutoff for 1,2 hours each day to prolong the working life of the product if the indoor temperature is excessed in Summer.
4.Store the mattress in shady and ventilated place and keep them smooth when nonuse in a long time.
Specification
Power | Ac220V±22V |
Voltage | 50Hz±1Hz |
Work Period | 6min±1min |
Max Noise | ≤45dB(A) |
Input Power | ≤20VA |
Specification | 200cm×90cm |
Gassing Pressure | 4.5kpa~25kpa |
Package Size | 36.5cm×24cm×33cm |
Weight | 6Kg |
Ambient Temperature | 5°C~40°C |
Relative Humidity | ≤80% |
Fuse Protector | FO.5AΦ5×20 |
Item | Model | Package(mm) | QTY | GW(KG) |
Bedsore mattress | QL-1B | 500*385*350 | 2 | 16 |
Picture