Air to water heat pump
Copeland compressor
Green R410A gas
Europe popular
This CAR series air source heat pump(CAR-08 to CAR-24) is special designed for house family house, it can connect to underfloor pipes for house heating, or connect to radiator for house heating; and with all year around sanitary hot water supplied.
An air source heat pump uses outside air as a heat source or heat sink. A compressor, condenser and refrigerant system is used to absorb heat at one place and release it at another.
1 Pressurized system design to keep hot water at consistant temperature all the time.
2 100% water circulation of the air source heat pump design
3 Electric protection class IPX4
System introduction
1 Scroll compressor inside.
2 Compact structure, easy demountable for access.
3 Environment friendly refrigerant of R410A or R417A is available.
4 Intelligent controller adjustment by quickmind microprocessor.
5 Four way directional valve.
6 Careful protections like high/low pressure protection, water flow switch protection, overheating protection, overload protection and so on.
7 Fault self-checking function.
8 Automatic defrosting and antifreezing function.
Product options:
Stainless steel cover or powder coated cover
Bottom heater function
Parameter list:
Air Source Heat Pump Water Heater | |||
MODEL |
| CAR-24 | |
Working temperature range | °C | -20°C~43°C | |
Rated heating capacity | KW | 23 | |
BTU | 78498 | ||
Hot water supply | T/h | 0.46 | |
Heating input power | KW | 4.68 | |
Rated heating input current | A | 13 | |
COP |
| 4.7 | |
Output water temperature | °C | 60°C | |
Power Supply | V/Hz | 400V/3N/50HZ | |
Noise | dB(A) | ≤55 | |
Dimension | mm | W880*D780*H1000 | |
Unit weight | KG | 225 | |
Throttle type |
| Electronic /thermal expansion valves | |
Refrigerant type |
| R410A | |
Compressor | Type |
| Sanyo, Daikin optional |
Quantity | pcs | 1 or 2 | |
Air source heat exchanger | Type |
| Finned heat exchange |
Quantity | pcs | 1 | |
Fan type |
| Axial big twist Angle fan | |
Motor power | KW | 0.37 | |
Hot water side heat exchanger | Type |
| Efficient tube in tube heat exchanger |
Water flow | m3/H | 3.72 | |
Water pressure down | kPa | 32 | |
pipe size | DN | 25 | |
water side max working pressure | kPa | 1000 | |
The test conditions of above parameter:dry bulb temp is 20DegC. wet buld temp is 15DegC. inlet water temp is 15 DegC. outlet water temp is 55 DegC.
