1.heating in winter
2.cooling in summer
3.domestic hot water

 Cycle split type heatpump

Heating capacity:18kw/15500Kcal/h.

Power input:cooling 4600w,heating 4500w

 Rated water output capacity: 400l/h(test condition:ambient temp 7centidegree)

Rated water output temperature:55centidegree,Max outlet water temp:60centidegree,

pouple pipe diameter: 32mm

compressor: scroll type.

refrigerant: R410a/R22

Heat exchanger/condenser: tube coiled type.

Defrost mode: reversed cycle/4-way valve

Refrigerant throttling mode: expansion valve

water pump: without .

The split type units mean the main unit and the water tank are separate,and that is easy and flexible to select the place of installation.The capacity of the water tank may be made a choice according to family people. 

Separate water system and electricity,reliability and safety.

The material of the water tank  is adopted the high quality stainless steel. The resin sponge is filled in the interspace between the inner wall and outer, and that is good heat insulation.

By microcomputer controller and automatic intelligentizing mode,within 24 hours hot water supplying setting,timing ON/OFF designation to set freely.

The products are with economy and energy saving, consumption of yearly average of electricity is as same as 65% of the solar water heater and 25% of the electrical water heater.

The products are adopted the theory of thermal transmssion:Compressor operates to discharge the high temperature carrier of the refrigerant and that makes water heat.That is no exhaust gas discharging and waste residue.

The products are adopted the heat exchanger/condenser of the high efficient sealed shell  type.The water of the system and the refrigerant operate  heat exchanging in the whole dynamic process that protects the tube from dirt.

The products are suitable for family,hotel, barbers, beauty shop, school, hospital, etc.