Electric hospital equipment with five fuction for hospital ICU BED or caring bed .
Fuction with board turn over or scale,C
Electric hospital equipment with five fuction for hospital ICU BED or caring bed .
Fuction with board turn over or scale,CE
1, saving space
ICU bed with the integration of medical pendant arms system, it is available for hospital to save valuable medical space to service more patients at a lower cost.
2, digital weighing system
With the use of high-precision weighing sensor, the weighing system reaches precision up to 10g. Doctor and nurse can real time monitor patients current weight and weight change. The system also can be connected with the hospital's LAN, then to be a comprehensive electronic management system.
3, medical pendant arms system
The bed is equipped with medical pendant arms. This pendant is structured with separate dry and wet sections, with transfusion pump shelf in the wet section and monitor machine in the dry section. It can be rotated in a variety of configurations as well to meet emergency care specific needs.
4, multi-position adjustment
Driven by the electromotion through reliable static motors, the bed can change the height of the pallet, the inclination angle of backrest segment and legrest segment. Meanwhile it can be adjusted to CPR position, fowler position, trendelenburg positon and reverse trendelenburg position. Electric board turn over function meets the special need of caregivers and patients.
5, flexible movement
With the medical casters of high stability and central braking system, the bed can be moved smoothly or be braked easily. Therefore, patients with critical illness can be transferred conveniently if necessary. Meanwhile, it is also very helpful for doctors to form a large-scale ICU immediately to salvage patients timely in disastrous accidents.
Specification
Model
PY-ICU1
Length
2550mm
Width
1100mm
Heigth of pendant arms to floor
1700mm
Deck height(low position)
450mm
0~250°
0~150°
Caster
Φ150mm, central braking system
Head-board
PE
Side rail
PE
Total Weight
About 200kg
Back Section Lift
0~85°
Leg Section Turn
0~45°
Height Adjustment
300mm
Right or Left Lateral Turn Over
0~45°
Supply Power
AV220V/50Hz 100VA
Weighing Display Control System
Max Measuring Resolution
200000/mV
Precision
20000/mV
Senor Exciting Voltage
5V DC
Input Signal
-30mV~+30mV
Nor-Linear
±0.001%F.S
Sample Frequency
100Hz50Hz25Hz12.5Hz6.25Hz
Zero Track
+/-0.5d+/-1.0d+/-2.0d+/-3.0d
Zero Track Rate
0.5d/2s0.5d/s1.0d/s1.5d/s2.0d/s3.0d/s4.0d/s6.0d/s
Manually Zero Set
+/-4%Max+/-50%Max
Zero Set at Power On
+/-2%Max+/-10%Max+/-20%Max
Static Measure Limit
+/-0.05d+/-0.1d+/-0.25d+/-0.5d+/-1.0d+/-2.0d+/-4.0d
Static Measure Time
0.1s9.9s
Working Volt
9V DC 450mA
Operating Temperature
-20~60
Operating Humidity
10%~85%
