Thermal laminating film is a 2layer product which consists of basic film and adhesive.It is suitable for dry laminating
The basic layer of film doesn't melt at laminating temperature.It is produced through the extrusion coating process.where the adhesive is applied to the film.when heated,the adhesive melts to a tacky condition where is married to the printed sheet under extreme pressure.when cooled to a solid again.the adhesive provides a high strenght chemical bond.our adhesives give superior bond strengths on a wide variety of subject material.such as paper,board,metal ,plastics,etc
Process Parameter:
Equipment for laminating film:dry and wet film laminator
Temperature:85-100 0C Special:100 -120 0C
Roller pressure: 10-18 Mpa
Speed: 8 - 50 m/min
Remarks:Special laminations refer to those with thicker ink,solid color,high moisture content and bigger size paper.
Bopp thermal lamination film Gloss & Matt) |
|
| ||||||||||
|
|
|
|
|
|
|
|
|
| |||
SPECIFICATION & PARAMETER |
|
| ||||||||||
SPECIFICATION | 24MIC GLOSS | 25MIC GLOSS | 27MIC GLOSS | 30MIC GLOSS | 25MIC MATT | 27MIC MATT | 30MIC MATT | |||||
THICKNESS(UM) | BASE | 12 | 12 | 15 | 18 | 15 | 15 | 18 | ||||
EVA | 12 | 13 | 12 | 12 | 10 | 12 | 12 | |||||
TOTAL | 24 | 25 | 27 | 30 | 25 | 27 | 30 | |||||
WEIGHT | /kg | 45.04 | 43.22 | 40.1 | 36.15 | 44.24 | 40.84 | 36.87 | ||||
kg/ | 0.222 | 0.0231 | 0.025 | 0.02766 | 0.0226 | 0.02448 | 0.02712 | |||||
Width | 140 190 200 360 390 440 540 590 780 880 1080 1320 1400 1600 1800 Upon customers requirement | |||||||||||
Lenghth | 300 - 6,000 more or less 10% allowed | |||||||||||
|
ONE SIDE
| BOTH SIDE |
| |||||||||
| 2 Less than 2 | |||||||||||
| MD:3.1*106 dyne/cm CD:6.1*106 DYNE/cm | |||||||||||
| 25.4mm(1 inch);58mm(2.25 inch);76mm(3 inch) | |||||||||||
PS
24MIC=2.4C=0.945MIL
25MIC=2.5C=0.984MIL
27MIC=2.7C=1.06MIL
30MIC=3.0C=1.18MIL
