Series-parallel Vessel Using Pump
1. Patented pump;
2. Vessel using pump;
3. Twin/single-suction centrifugal impeller.
TYCBL Series-parallel Connection Vessel Using Pump
GENERAL INTRODUCTION:
Series-parallel vessel using pump is vertical dissection double-stage single-suction and series-parallel connection centrifugal pump, inlet and outlet both on the same side of pump. Without moving the connecting pipeline, we can also dismount or repair the pump. The pump let the exchange of series and parallel connection be achieved through the reversal valve at the inlet.
APPLICATION SCOPE:
Vertical series-parallel centrifugal pump are applicable to pumping fire-fighting water, cooling water and
driving water for jet pump. The pump can pump fresh water and seawater.
STRUCTURE FEATURE:
Pump rotor parts are comprised of two single-suction centrifugal impeller, which installed on the pump shaft and fixed by upper, intermediate and lower shaft sleeve. Bottom of shaft strong by two nuts, upper end of rotor parts is supported by two angular contact ball bearings, bearing is lubricated by grease, lower end of rotor is supported by water lubricated bearing. The pump body is divided into two section along the axis, pump casing and pump cover. Inlet and outlet flange are installed on slide valve.
PERFORMANCE DATAS:
Capacity | 25~150m³/n |
Head | 80~160m |
Working Pressure | 2.5Mpa |
Working Temperature | 0~+120°C |
DRIVEN:
The rotation direction of the pump is clockwise from the view of motor .