1.30L/H Capacity cold water
2,under a counter, easy to install.
3.ice-bank cooling

1. Converts any Drinking Fountain into a Water Cooler by installing  B300B water chiller within or behind building walls.
2. One Chiller Can Service Up To two Fountains.
3. Stainless Steel Cabinet.
4. Hermetically Sealed Compressor.
5. Fully automatic operation.
6. Easily connected to most filter systems.
7.Robust construction.
8.adjustable cold water,thermostat

9.Condenser  Fan cooled, copper tube with aluminium fins.
10.cooling method:  Ice bank

11.All use R134a refrigerant gas which is non-toxic, non-flammable and environmentally friendly.

12. Capacity of refrigerating water: 45L per hour.

Model B300B water cooler is a 220 Volt, 50 Hz remote chiller provides 8 gallons (30 liters) per hour of cold water. This remote can provide chilled water to a water to a wide variety of fountains with modern styling. Chiller can be concealed under a counter, between or within walls (check local codes), or high on a wall or column. Ideally suited for factories, cafeterias, restaurants, schools, and offices. Other uses could be for precooling for beverage dispensers and fountains, machine coolant cooling, photo and X-ray processing, laboratory experimental work, or a capacity booster for ice cube makers. Model B450B, 45-lph remote chiller, includes a heavy gauge stainless steel steel cabinet.

The refrigeration system is balanced to provide low energy usage and a longer life assured by utilizing a high displacement compressor, a counterflow cooling evaporator/chiller, efficient capillary sizing, a large capacity dryer-strainer, and a fan-cooled condenser with maximum heat exchange. Environmentally friendly R134a refrigerant is controlled by calibrated capillary tube. Air cooled remote chillers require air circulation for proper operation. Any chiller mounted under a counter must also be provided with adequate ventilation.

When chiller is installed in wall be certain that it can always be removed through opening without damaging either chiller or wall. Allow minimum 1" clearance. Minimum 4" clearance on back side. Unit is furnished with leads enclosed inside terminal enclosure 220 Volt, 50 Hz, single phase. Capacity is based on standard of rating conditions of 38-50°F (3-10°C) drinking water, 68°F (20°C) inlet water, and 77°F (25°C) room temperature.