Rotary calcination kiln
1) Leading Manufacturer
2) High Capacity
3) Low Consumption
4) Eco-Friendly
2011 New Type Rotary Calcination Kiln For Ore Dressing
Rotary calcination kiln brief introduction:
Rotary calcination kiln is composed of cylinder, gears, support device, kiln liner and kiln tail sealing equipment, kiln head hood and combustion.
Cylinder of the rotary calcination kiln as heated pivoting part, made of high-quality carbon steel plate, is supported on the support device by tyre, and there is machanical or hydraulic pressure catch wheel on the first or some gear in order to control the turning of cylinder. Gearing gyrate according to process-required rotating speed by ring gear in the middle of cylinder. Because of the need of installation or maintenance, the bigger rotary kiln has auxiliary gears, which makes cylinder gyrate more slowly. To prevent cold air come in and dust overflow, the reliable kiln tail and head sealing equipment is installed on feed and discharge end.
Rotary calcination kiln application:
1. Support device: advanced shaft structure, automatic temperature measuring device and electrical heating,.
2. Catch wheel : including two kinds mechanical wheel and hydraulic pressure
3. Gears: single or double. Control the rotating speed by buncher, DE machine and frequency variable motor. Be reliable , energy-saving, and efficient.
4. Cylinder tyre bolster: lower bolster has three types: fixed , zoom and floating. The structure is simple , replacement is convenient and wont hurt cylinder.
Rotary calcination kiln Parameters:
Serial number | specification | output | rev(rpm) | Pedestal number | reducer | electricmotor | power(KW) | remark |
model | ||||||||
1 | Φ1.6×32m | 2 | 0.58-2.85 | 3 | ZQ75-50 | YCT250-4A | 18.5 |
|
2 | Φ1.6/1.9×36m | 2.5-3 | 0.53-1.59 | 3 | ZQ110-7 | YCT250-4B | 22 |
|
3 | Φ1.9×39m | 3-3.4 | 0.53-1.59 | 3 | ZQ125-7 | YCT315-4A | 37 |
|
4 | Φ2.2×45m | 4-5 | 0.214-1.64 | 3 | host ZS125-5 | host YCT315-4B | 45 |
|
5 | Φ2.5×40m | 6.3 | 0.62-1.5 | 3 | host ZS165-5 | host YCT355-4A | 55 | Preheater kiln |
6 | Φ2.5×50m | 5-6 | 0.62-1.5 | 3 | host ZS165-5 | host YCT355-4A assist Y160M-6 | 55 |
|
7 | Φ2.5×55m | 5-6 | 0.62-1.5 | 3 | host ZS165-5 | host YCT355-4A assist Y160M-6 | 55 |
|
8 | Φ2.7×42m | 13 | 0.6-2.3 | 3 | host ZS145-3-i | host YCT355-4A | 55 | Preheater kiln |
9 | Φ2.7×44m | 13 | 0.74-2.21 | 3 | host ZSY355-50-i | host YCT355-4A | 55 | Preheater kiln |
10 | Φ2.8×42m | 14 | 0.5-2.503 | 3 | ZSY355-50-i | host Z2-101TH | 55 | Preheater kiln |
Please do not hesitate to contact us if any question and we are waiting for you.
