new annealing furnace

Introduction:

1 Old style annealing furnace can not meet customer’s
requirement for products,especially on cleanliness.It’s
difficult to control the old style annealing furnace,so
workers always make mistakes to control the old style
annealing and make loss. I have been in manufacturing
glass bottles and repairing glass products line more than
ten years. With my long term experience, I spent two
years on succeeding in inventing ZP18 gas annealing
furnace for glass bottles product line. ZP18 is new style
annealing furnace.After we test it, it runs stable and its
internal stress is eligible,and it can make your glass
bottles high cleanliness.
2 ZP18 fully make uses of the afterheat of glass
bottles,then reheat it in time to process the furnace..;So
we save energy for prompt furnace.Prompt furnace can
make high cleanliness, and also can avoid that workers
make mistakes. ZP18 also can correct the defect of the
products,and make better quality.
3 The conveyer belt is made by fireresistant stainless
steel.Electronic displays the temperature. ZP18 can use
liquid gas,natural gas and coal gas as fuel,and air
pressure will help fire burn.After mixing up temperature
air stress is stable,it’s easy for workers to operate.
4 The firebox and heating box are divided by heater
plate,and it avoid that dirty gas pollute glass bottles.The
combustion chamber is made by new type fireresistant
thermic insulant and fiber insulant. So these new type
material make less heat dissipating capacity. Less heat
dissipating capacity make ZP18 more high efficiency.
Less heat dissipating capacity make ZP18 not impact the
temperature of the workroom,thus, the workers can have

better working condition.
5 ZP18 is the linkage with glass bottles machine. You
can change the sprocket wheel to change different
products. You also can use speed regulating motor to
change the speed of the belt.
6 ZP18 is easy to operate and repair. It is more high
efficiency,and the price is reasonable,and it can make
eligible products.
7 ZP18 is all-in-one,an it can use for 2ml-30ml tubular
vials products line and dealing with internal stress of
tubular vials. The temperature of glass bottles from the
product line is lower than 150º,and it will make glass
bottles with good toughness. The furnace temperature is
around 570º
-650º,and the glass bottles will not become deformed
and conglutinate. Lower temperature can make products
with good toughness,and also save energy. We also
make special annealing furnace for your products line to
save your cost and energy.

Technical parameter:
Width of net belt:230mm
Effective size of heath box:2000*250*50mm
Gas pressure:700mm/mercury column
Air pressure:0.01Mpa
Gas dosage:liquid gas:6-8kg/24 hours natural
gas:6.5CBM/24 hours (different dosage for different
products)
Outside measurement:2900*500*620mm(L*W*H)
Weight:250KG