mold temperature controller
1:Taiwan pump
2:Schneider eletrical appliances
3:P.I.D temp control
4:Multi security devices
Microprocessor standard water-type mold temperature controller (JB-09WS standard water-type)
Standard water-type mold temperature controller use water as the heat transfer medium, and process for heating up to 90°c under direct cooling method. It is an indispensable device for the plastic processing.
Main Features:
1: Excellent heating performance:
• High capacity Taiwan pump from 0.5HP/0.37KW to 2HP/1.5KW
• Hongkong stainless steel heater from 30°C to 90°C.
• leak-proof cast tank in stainless steel
2: Good controlling temperature system:
• Schneider brand electric appliances
•P.I.D controlling system can control temperature precisely to ±0.5°C
3: multi-security devices:
• Protective for motor overload, shortage of water, overheat, abnormal circumstance,etc.
4: automatic water-supply and air-exhaust devices keep pump and heater in safer operation condition
Technique parameters:
model | JB-MW-06S | JB-MW-09S | JB-MW-09H | JB-MW-12H |
heating medium | water | |||
temperature range | 30-90°C | 30-180°C | ||
heating capacity/KW | 6 | 9 | 9 | 12 |
pump power/KW | 0.37-0.75 | 0.75-1.5 | ||
Maximum pressure | 2.5kg/cm² | 3kg/cm² | 5kg/cm² | 5kg/cm² |
TVU flow | 50L/min | 50L/min | 100L/min | |
cooling method | direct cooling | |||
tank volume | 8L | 10L | 8L | 10L |
Dimension | 660×250×550mm | |||
Net weight | 45-50KG | 50-62KG | 50-63KG | 63-67KG |
Power supply | 3Phase-380V-50Hz |