Welcome to B2BAGE
Heater belt for crankcase
Heater belt for crankcase

Minimum Order: 0
Quality/Safety Certification: 0.00


Apply Cr20Ni80 wire to be winded on glass fiber, epiboly with silicone rubber as insulation heat conduct layer

 

Auxiliary Electric Heater For Compressors and Crankcases

Product description

Working environment temperature of designed air-conditioner compressor is about 4 while surround environment temperature is bellow zero air conditioner is hard to make enough heat to meet the requirement. In situation, a subsidery electric heater is necessarily used at end of central air-conditioner to make the supplementary heat

Our subsidiary electric heater series are the most suitable and ideal heating source designed and manufacture for this appliance, moreover, our subsidiary heater series do not need any other subisidiary equipment. They have such many obvious advantage as being easy in installing, safe in operating and maintenance.

Products type: electric heating wire(band), stainless steel band heater and PTC electric heating element.

Applications

Applied insertion to rated voltage bellow 450v,50-60HZ, related humidity≤90%. Diffuse heat after conducting at electricity in an environment temperature of -30-+50.It is generally used in central air conditioner compressor. It is also applied in cold area, and oil tube.

 

Electric heating band

Apply Cr20Ni80 wire to be winded on glass fiber, epiboly with silicone rubber as insulation heat conduct layer, with its end using heat resistance silicone rubber wire connection electric heat element.

Electric heating wire

Cr20Ni80 wire to be winded on a glass fiber to be covered with silicone rubber used as heat conductor, to be wrapped with stainless steel woven sheath, ends of heating wire, lead wire to be connected with.

Technical data

1.       Insulation resistance: after putting the whole tube in water for 24 hours, insulation resistance≥1000Mohm

2.       Dielectric test of AC1800V/1Min, no flashover happened

3.       leakage current in working temperature 0.1mA

4.       power deviation:±7% at rated voltage

5.       Down-lead intension: after the test of 30N pull, the down-lead part does not be moved or ruptured.

Related Products
Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.