Self-extinguishable Fiberglass Sleeving
(In accordance with JB/T 7093-93)
silicone resin sleeving
srg-514
Self-extinguishable Fiberglass Sleeving
(In accordance with JB/T 7093-93)
Self-extinguishable fiberglass sleeving treated at a high temperature is the sleeving braided with non-alkali fiberglass and coated with a special kind of silicone resin.
Self-extinguishable fiberglass sleeving possesses good qualities of dielectric, self-extinguishment, excellent softness and elasticity, It is widely used as wiring insulator for H grade electrical machinery, domestic electrical appliances, TV sets and electric apparatus, and also for the protection of collected strands of wire
Length: 1000 (+20/-10)mm (Continuous length maybe negotiated)
Appearance:White,clear and neat ends.
Heat resistance: After the sleeving has been treated under an temperature of 250±3°C in a cabinet for 24 hours, the coating of the sleeving should not appear detached, and discolored
Self-extinguishment: Shorter than 10 seconds if the diameter of the sleeving is (or less than) 3.5mm. But shorter than 15 seconds if the diameter of the sleeving is 4 to 8mm
Breakdown voltage at room temperature:
Type I: Not lower than 4000V
Type I: Not lower than 1500V
Bore Diameter | Wall Thickness | ||
Nominal | Tolerance | Minimum | Maximum |
0.5/0.8 | ±0.10 | 0.20 | 0.50 |
1/1.5 | ±0.15 | 0.20 | 0.75 |
2/2.5 | ±0.20 | 0.20 | 0.75 |
3 | ±0.25 | 0.20 | 0.75 |
4/5/6 | ±0.25 | 0.30 | 0.75 |
7/8 | ±0.50 | 0.30 | 0.90 |
9/10/12/14/16/18/20/23/25/27 | ±0.50 | 0.40 | 0.90 |
