Minimum Order: 0
Quality/Safety Certification: 0.00
1.multi-section lithium battery protection board
2.Electric tools battery protection
3.Lithium battry protection borad
4.OEM
Model | SPL013A |
Category | 3(4) lithium battery protection |
Field | Multi-section lithium battery protection board |
Size(mm) | Length | 48 | Width | 13 | Thickness | 3 |
Products characteristic | 2Adischarge current |
Introduction |
1. Electrical properties Item | Min | Typical | Max | Notes | Application for 3/4 strings lithium ion/polymer battery pack | Over-charge protection voltage (V) | 4.25 | 4.275 | 4.30 | Monomer batteries | Over-charge protection recovery voltage (V) | 4.02 | 4.075 | 4.13 | Monomer batteries | Over-charge protection delay time (s) | 0.5 | | 1.5 | | Over-discharge protection voltage (V) | 2.20 | 2.30 | 2.40 | Monomer batteries | Over-discharge protection recovery voltage (V) | 2.60 | 2.7 | 2.80 | Monomer batteries | Over-discharge protection delay time(s) | 0.5 | | 1.5 | | Output loop resistance(mΩ) | | 80 | 120 | | Over-current protection (A) | 5 | | 7 | Activation charge | Over-current protection delay time(ms) | 7 | 15 | 23.0 | | Short-circuit protection | | Yes | | Activated to lift the load. | Quiescent current consumption(u A) | | 30 | 40 | | After over-discharge protection static current consumption (u A) | | 1 | 2 | | Normal discharge current(A) | | 2 | 3 | | Temp sense input(NTC) | | / | | | | 2. Above protection only for monomer batteries, when multi-monomer combination, any one monomer can get the protection point, then the whole set of batteries pack be protected. |
2. Master IC:S8254 ; MOSFET:APM4953 |