1.Shrink ratio: 2:1
2.Produced by co-extrusion of irradiated
3.Operating temperature
4.Excellent Quality and Reasonable Price
Dual-wall Adhesive Lined Heat Shrink Polyolefin tubing
Product Description:
Manufactured by co-extrusion of irradiated crosslinking polyolefin and specifically disigned hot melt adhesive.
Operating temperature: -55oC~ 125oCFlame retardant: UL224 VW-1Good in quality and has a competitive priceVarious in design and different color selectionRoHS Compliant: Pass SGS ReportApplication:
This tube can be used in a wide variety of electrical applications,including back end connector sealing,breakouts,and connector to cable transitions. High expansion ratio makes it possible to repair most damaged cable jackets without removing connectors.
| Tensile Strength | ISO37 | 9.0MPa minimum |
| Ultimate Elongation | ISO37 | 300% minimum |
| Specific Gravity | ISO1183 | 1.25 maximum |
Inner wall adhesive SPDW to SP SPDW to Alumnium | 150N/25MMminimum 60N/25MMminimum | |
| Heat Shock | ASTM D2671 (4Hrs at 225°C) | no dripping,cracking or flowing of outer wall |
| Heat Aging | ISO188 (168Hrs at 150°C) | no dripping,cracking or flowing of outer wall |
| Low temperature Flexibility | ASTM D2671 (4Hrs at -50°C) | no cracking |
| Electric Strength | IEC 243-1 | 12KV/MM Minimum |
| Flammability(Outer wall only) | ASTM 876 | Pass |
| Corrosion | ASTM D2671 (16hrs at 15°C) | no corrosion |
| Water Absorption | ISO62 | 0.5% Minimum |
Fluid Resistance
Tensile Strength Ultimate Elongation
| ISO 1817
ISO37
| 7map Minimum 300% Minimum |
