1. include English User's Manual
2. ex-stock for prompt delivery
3. can design the single phase/high voltage inverter

1. Advanced vector control algorithm, combine accurate speed calculation and self learning of the motor parameter. It realize the accuracy control of motor speed and torque under no- speed sensor mode. V/F and SVC can be selectled.

2. Optimized space voltage vector PWM modulation technology, has over-modulation function, high voltage-utilization, low output harmonic, and it greatly improves the motor's stability and switching loss.

3. Good operation characteristic of low frequency, can realize 0.5Hz/150% rated torque output which under no-speed sensor mode.

4. LCD and LED double display keyboard, display digit and Chinese, the user can operate easily.

5. Abundant functions: Automatic voltage regulation control, automatic slip Compensation, Restart when power cut and so on. Can meet the demand of different clients.

6. Customization function design: Program running, wobble frequency running, PID control operation, timing function, counter function Sect. Can be convenient to form and meet the different industrial field demands;

7. Built-in RS485 interface, compat MODEBUS communication protocol, can realize networked control.

8. Super strong protect function: Over voltage, over current, over load, under voltage, over heat, short circuit and so on, can offer more than 20 kinds failure protection function for user.

    Operating              functionOperating commandOperator panel control, external terminal control and COM controlDC brakingPanel potentiometer setting , operator panel UP DOWN setting , external terminal up/down setting, analog voltage signal or external potentiometer setting, analog current signal setting, analog assembly setting , 485COM and setting and ect.Input signalForward/Reverse signal, multiple speed signal , failure signal.Output signalProgrammable relay , Open-controller output, Failure signal output and ect.Multi-function analog and digital output terminalThis can realize the output of frequency, current and other physical quantity by outputting 0~10V or 0~20mA DC signal and 0~10KHZ digital signal .Braking   unitDynamic brakingWith an external braking resistor, the maximum braking torque may reach 100%.DC BrakingThis can be selected when the motor starts or stops with the action frequency of 0~20Hz, action current level of 0~100% and actuation time of 0~30sec. which can be set in sequence .Other     function Leap frequency, Jog function,counter, trace to rotating speed, instant shutdown restarting, Frequecny upper/lower limitation , acceleration/deceleration mode regulating, frequency meter and voltmeter output, multiple speed/program operation, two-wire/three wire control,vibration frequency control, Multi-function input terminal selection, Failure auto reset and 485COM.Protection functionInput open-phase protection, over-current protection, overload protection , under voltage protection, overheating protection and ect.LED LCD DisplayReal-time display the running state, monitoring parameters, function parameters, diagnostic trouble codes(DTC) and other information of the inverter.Matching PartsBraking assembly, remote operator panel, connecting wire, communication panel