sine wave power inverter
DSP digital and intelligent design
high efficiency
Low output harmonic distortion
Excellent EMC des
The product is a sine wave power inverter which can convert 12V/24V/48V DC to 220V AC (50Hz/60Hz) based on high performance DSP full digital and intelligent design. It has the features of high reliability, high efficiency, low weight, small volume, full protection functions, easy installation and operation. The inverter can be applied in many fields especially for solar photovoltaic power system.
l Powerful DSP digital and intelligent design
l Wide DC input voltage range
l Pure sine wave output with high efficiency and stability
l Excellent EMC design
l Low output harmonic distortion(THD≤3%)
l Two on-off control mode: local main switch and remote control switch
l LED indicators for input voltage range, load power range, normal output & failure state
l Load short-circuit, overload, input voltage under/over and over-temperature protections and alarms, inverter’s inner fault protections.
l RS-232 communication interface connecting with PC or other control and monitor device.
l Fitted for many kinds of AC loads such as household appliances, electric tools and industrial devices
Wide working temperature range (industrial level)
DC Input
Model | SHI 400 /12-220 | SHI 400 /24-220 | SHI 600 /12-220 | SHI 600 /24-220 | SHI 1000 /24-220 | SHI 1000 /48-220 |
Input rated voltage | 12V | 24V | 12V | 24V | 24V | 48V |
Input voltage range | 10.8-16 VDC | 21.6-32 VDC | 10.8-16 VDC | 21.6-32 VDC | 21.6-32 VDC | 43.2-64 VDC |
No-Load Current | ≤1300 mA | ≤600 mA | ≤1200 mA | ≤600 mA | ≤1000 mA | ≤600 mA |
AC Output
Model | SHI 400/12-220 SHI 400/12-220 | SHI 600/12-220 SHI 600/24-220 | SHI 1000/24-220 SHI 1000/48-220 |
Output Voltage | 220V±5% | ||
Rated Power | 400VA | 600VA | 1000VA |
Maximum Short Time Power | 600VA 5s | 900VA 5s | 1500VA 5s |
Surge Power | 800VA 1.5s | 1200VA 1.5s | 2000VA 1.5s |
Output Mode | Single phase | ||
Frequency | 50Hz±2% | ||
Load Power Factor | COSθ-90°~ COSθ+90° | ||
Output Waveform Distortion | THD≤ 3% | ||
Efficiency at Rated Power | ≥90% | ||
Mechanical parameters
Model | SHI 400/12-220 SHI 400/12-220 | SHI 600/12-220 SHI 600/24-220 | SHI 1000/24-220 SHI 1000/48-220 |
Exterior (L*W*H mm) | 273×158×71.5 | 304×175×71.5 | 370×201×90.5 |
Installation (L*W mm) | 210×146 | 196×164 | 207×189 |
Net weight (kg) | 2.2 | 2.65 | 4.35 |
Environmental parameters
Working Temperature | -20°C~+55°C |
Storage temperature | -25°C~ +60°C |
Altitude | < 5000 m |
Relative Humidity | < 90%(non-condensation) |
