Pure sine wave Inverter with charger
1.Intelligent microcomputer CPU
2.Protection functions
3.For Ni-Cd/Ni-MH battery
Changhong Pure Sine Wave inverter
Changhong inverter has good load carrying capacity and load compatibility. Besides, built-in bypass switch greatly improves its continuity and reliability. Changhong inverter has good selected mating, which can cut off DC power supply in switch-on state and automatically switch to commercial power bypass power supply. It is more convenient to maintain and replace the rechargeable batteries, but has no effect on supplying power to load.
Changhong Inverter technical data sheet
Model | CH48/220-3KVA | ||
AC Output | Rated Capacity | 3000VA | |
Power Factor | 0.8 | ||
Voltage | 220VAC±1.5% | ||
Frequency Precision | 50HZ±0.1% | ||
Output Distortion | Sine wave, THD≤3% | ||
Efficiency | DC to AC | ≥85% | |
DC Input | Voltage | 40-70V | |
Startup Voltage | 42-68V | ||
AC Input | Voltage | 220VAC±25% | |
Rated current | 13.6A | ||
Frequency | 50Hz±5% | ||
Over current Protection | 120% of full rated load, 30s | ||
Isolation | PRI-SEC: 2000 VAC, 1min, 10mA | ||
PRI-GND: 2000 VAC, 1min, 10mA | |||
SEC-GND: 2000 VAC, 1min, 10mA | |||
Noise1m | <40dB | ||
Operating Temperature Range | -25 ~ +55 | ||
Operating Humidity | 0 ~ 90% | ||
Operating Altitudem | ≤5000m | ||
Color | Gray | ||
Net Weight | 11Kg | ||
Gross Weight | 12.5 Kg | ||
Dimension | 380X482X88(mm) |
Changhong Embedded Charger
Changhong Embedded charger designed for charging up the Ni-Cd/Ni-MH batteries, is newly developed communication power supply system based on traditional switching power supply technology. It adopts CPU control circuit and monitor interface to realize the remote signaling, remote control, remote measuring and remote regulating of the rectifier module. Besides, adopting high frequency PFC and phasing resonance technologies greatly improve electrical properties, input voltage range and overall efficiency in particular.
Changhong Charger technical parameter
AC input:
Rating voltage: signal-phase 220VACInput over-voltage protect: >300Vac±5VAC.Recover voltage : <270VAC±5VACNormal voltage range: 170Vac270VacUnder voltage range: 85Vac170VacFrequency: 45Hz66Hz
DC output:
Output voltage adjustment range: 40Vdc70VdcRating current: 25AMax output power: 2100W
Other parameter:
Efficiency: ≥90%.( 220Vac AC input, output from half load to full load )Power factor: >0.99 (rating AC input, output for full load)Output ripple voltage : ≤200mVBW 20MHzPsophometric noise: ≤2mVLoad regulation: <±0.5%Line regulation : <±0.1%Accuracy of voltage stabilization: <±0.6%Temperature coefficient1/±0.02Soft-start time: 38sNoise: <55dbALoad sharing: digital current-averaging, load imbalance ≤±5, when several modules work in parallel.lMTBF:≥1×105hDimensions: 484mm×88mm×370mm(width× height× depth)Weight: <8KgProtection function:
Input soft-startOver-voltage protectionCurrent-limited protectionOverheat protectionShort-circuit protectionFan fault detection and stepless speed regulationRectifier module supports hot plug and play
Insulation performance
AC circuit-to-DC circuit can withstand 50Hz, 2000Vac 1 minute, no breakdown or arcing phenomenon.
Contact:
Ms. Vicky Liu Mr. Aaron Chen
Mobile:+86-13981110627 Mobile: +86-15881431809
Tel:+86-816-2863219 Tel:+86-816-2863219
Fax:+86-816-2862006 Fax:+86-816-2862006