grid tied inverter 200W,
Easy operation:connect your solar panel(DC10.5V to DC28V )
Feature
- Generates pure Sine Wave
- Automatic power adjustment
- Constant Power Output
- Low distortion output on all ranges
- Allow different Power factor from loads
- Compact and light weight design
- Maximum Power Point Tracking (MPPT) - optimize power output
- Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring
- Stackable (connect in parallel for higher output)
- Aluminum enclosure will act as heat sink to help dissipate heat
- Simple and safe installation
- Island protection: Inverter will shut down during black outs.
- Grid-Tied - sell green power directly back to the grid at a premium rate
(depends on your location)
Grid-inverter Type200
Recommended Maximum PV Power Ppv=260Wp
DC Maximum Input Power PDC. max=220W
DC Maximum Voltage Vpv DC28VDC
PV MPPT DC Voltage Range Vpv 10.5V~28DC
Peak Inverter Efficiency ηmax>94%
Power Factor 0.93-0.99
PV Maximum Input Current Ipv.max10A
Reverse Polarity Protection Fuse
AC Rating Output Power 175W AC
AC Maximum Output Power 200W AC
AC Normal Voltage Range 80V-130;160~260VAC
AC Frequency 45-65Hz
Inverter Output Current Total Harmonic Distortion THDIAC <5%
Phaseshift <1%
Island Effect Protection inverter shuts down during black out
Output waveform Pure Sine Wave
Inverter Output Shorting Protection Current Limiting
Standby Power Consumption <8W
Nighttime Power Consumption <1W
Ambient Temperature Range -20 °C~65°C
Cooling Convection cooled with fan
Ambient Humidity 0~100%(Indoor Type Design)
Eelectromagnetic CompatibilEN50081.part1 EN50082.part1
Power Network Disturbance EN61000-3-2
Power Network Detection DIN VDE 126
Display 1 Red and 1 Green LED
unit dimension(L*W*H) 220x165x58mm/280 x220 x130mm
net weight /gross weight (kg) 1.3/1.8
Input and output
1,DC input
* Input voltage range: 10.5V to 28V.
* Solar Panel: recommend the use of power greater than 30W, the standard voltage 17.5V PV panels.
* Recommended, and even solar panels, thread will result in high input voltage inverter which exceeds the working voltage range.
* Wind turbine: Rated voltage 24VDC, maximum voltage 28VDC.
2,AC output
* Output 220V AC power inverter can be used in voltage: 170V - 260V, 50 Hz
* Output 110V AC power inverter can be used in voltage range: 90V - 160V, 60 Hz
LED Indicator
1,Red LED
* Low-voltage protection (input DC voltage is less than 10.5VDC).
* Overvoltage protection (Input DC voltage is greater than 28.5VDC).
* Over-temperature protection (when the chassis temperature is above 75 °C,
the temperature dropped about 2-10 minutes to restart automatically after cooling).
* Fault Protection (when 110VAC or 220VAC power outage or shutdown).
* Islanding protection: electricity disconnected, the inverter automatically shut down output.
2,Green LED
* Green LED flashing: are adjusting power output, MPPT is working condition.
* Long bright green LED: Indicates the maximum inverter output power is in the locked state of work.
Notes
---Non-professionals do not disassemble, Only qualified personnel may repair this product.
---Please inverter installed in the low humidity and well-ventilated place to avoid the inverter
overheating, and clear around the inflammable and explosive materials.
---When using this product, avoid touching children, playing, to avoid electric shock.
---Recommended Maximum DC input 4AWG cable capable of handling more than 50A of the
cable size.
---Optimal length of the DC input line 8M or less, long cable will allow solar panels to the inverter
DC voltage drop caused by wear and tear.
---Connected to a power outlet to provide AC.
---Connected solar panels, battery or wind generators DC input DC power supply cable.
---Proposed wind power plant with its own charge controller and load dump
