1.hexagonal wire mesh
2.material:stainless steel wire
low carbon steel wire,etc
3.uesd in chemical, petroluem
industries,etc

Hexagonal wire mesh

 

Wire Materials for Hexagonal Wire Netting: Quality mild steel wire, stainless steel wire, PVC wire, etc.
Process of Hexagonal Wire Netting: Galvanized after weaving or galvanized before weaving.
Finish of Hexagonal Wire Netting: Electro galvanizing, hot-dip zinc plating, stainless steel or PVC coated.
General Use: Hexagonal wire mesh with its good corrosion resistance and oxidation resistance, serves well as strengthing, protection and temperature keeping materials in the form of mesh container, stone cage, isolation wall, boiler cover or poultry fence in construction, petroluem, chemical, breeding, garden and food processing industries

 

Assortments Available:

Electro Galvanized before Weaving Electro Galvanized After Weaving Hot Dipped Galvanized before Weaving Hot Dipped Galvanized after Weaving PVC Coated Before or After Weaving Stainless Steel Wire Galvanized Drawn Iron Wire

Galvanized hexagonal wire netting mesh Min. Gal.v. G/SQ.M Width Wire Gauge (Diameter) BWG Inch mm Tolerance(mm) 3/8" 10mm ±1.0 0.7mm - 145 2' - 1M 27, 26, 25, 24, 23 1/2" 13mm ±1.5 0.7mm - 95 2' - 2M 25, 24, 23, 22, 21 5/8" 16mm ±2.0 0.7mm - 70 2' - 2M 27, 26, 25, 24, 23, 22 3/4" 20mm ±3.0 0.7mm - 55 2' - 2M 25, 24, 23, 22, 21, 20, 19 1" 25mm ±3.0 0.9mm - 55 1' - 2M 25, 24, 23, 22, 21, 20, 19, 18 1-1/4" 31mm ±4.0 0.9mm - 40 1' - 2M 23, 22, 21, 20, 19, 18 1-1/2" 40mm ±5.0 1.0mm - 45 1' - 2M 23, 22, 21, 20, 19, 18 2" 50mm ±6.0 1.2mm - 40 1' - 2M 23, 22, 21, 20, 19, 18 2-1/2" 65mm ±7.0 1.0mm - 30 1' - 2M 21, 20, 19, 18 3" 75mm ±8.0 1.4mm - 30 2' - 2M 20, 19, 18, 17 4" 100mm ±8.0 1.6mm - 30 2' - 2M 19, 18, 17, 16

Note: 1.) The above tolerance comply with standard EN10223-2:1997; 2.) Minimum Galvanization is only for typical wire diameter as stipulated separately in the column for your reference; Also it is only for hot dipped Galvanized Netting.

PVC Coated Hexagonal Wire Netting Mesh Wire Gauge (MM) Width Inch MM - - 1/2" 13mm 0.6mm - 1.0mm 2' - 2M 3/4" 19mm 0.6mm - 1.0mm 2' - 2M 1" 25mm 0.7mm - 1.3mm 1' - 2M 1-1/4" 30mm 0.85mm - 1.3mm 1' - 2M 1-1/2" 40mm 0.85mm - 1.4mm 1' - 2M 2" 50mm 1.0mm - 1.4mm 1' - 2M

Note: The thickness of PVC Coating is usually 0.2-0.4mm, others may arranged as per buyers’ request; Package: Normally each roll packed in water proof paper, then in termo foil (Shrinked Plastic);