About our EL Membrane Switch : Non-harm, multiplex shape, thin, good flexible, no heated, mild light, good quakeproof.
The Advantage for EL membrane switch:
1: Combine apheliotropic panel with membrane switch
2: Lamp-house support by LED
3: Min thickness can be made 1.2mm
4: Arbitrary shapes: The range of sizes up to 23 x 35 inch
6: No affecting the function of input signal when the key is on
7: Match the IC driver to control the logo shine at all times and the key shine from a distance
Overlay materials: The most commonly used base materials are polyeaster or Polycarbonate;
Rear adhesive: 3M467 or 3M468;
Standard tolerance: +/-0.01 inch;
Matching color: Pantone and RAL;
Tail, pin, circuit layerout: Submit to customers detailed requests.
Electrical:
EL driver: between 3VDC to 24VDC ;Operating current: 100MA Max;
Operating loop resistance: Less than 200ohm, of course, we can make it within
100ohm based on customer's requirement;
Contact Bounce: Less than 5 milliseconds typical;
Conductors: Printed silver conductive inks or Carbon blend;
FRI and ESD shielding: Available in most configurations.