1) It could switch the signal from 8 PC to one monitor;
2)Switch mode:a.Button on the panel:
3)Support plug and play.
.
Introduction:
Thank you for purchasing this KVM switch. This KVM switch can save your MONEY, TIME, SPACE, EQUIPMENT and POWER. Controlling multiple PCs from One Keyboard, Mouse and VGA Monitor. It has complete keyboard and mouse emulation for simultaneous PCs boot up process.
Features:
USB 2.0 PORT
2/4 port KVM switch is compact size design, easy portable.
Supports Microsoft Intellimouse, Logitech Net Mouse, etc…
Supports DOS, Win3.X, Win95/98/98SE/2000/ME/XP, WinNT, Netware, Unix, Linux.
Hot Plug-add or remove connected PCs for maintenance without powering down the KVM switch or PCs.
Superior video quality up to 1920*1440, Bandwidth: 200MHZ.
No Software Required- PC selection via Push Buttons.
LED display for monitoring status.
Package Contents:
2 PORT KVM
8 PORT KVM
2 port KVM Switch
User`s manual
8 port KVM Switch
User`s manual
Technical Specifications:
Functions
2 PORT KVM
8 PORT KVM
PC Port
2
8
Console Port
1
1
MAXPC Connections
2
8
LED
2
8
PC Port Connector
2 USB type B port Female
2 VGA HDDB 15pin Female
8 USB type B port Female
8 VGA HDDB 15pin Female
Console port connector
2 USB Type A Port Female
VGA HDDB 15pin Female
PC selection
Button
On Screen Display Control
No
Keyboard EMULATION
USB
Mouse Emulation
USB
VGA Resolution
1920*1440
Bandwidth
250MHZ
Daisy Chain and Levels
No
Housing
Plastic
Size
Desktop
Weight (g)
150g
1850g
System Requirements Specifications:
Functions
2 PORT KVM
8 PORT KVM
Console Side
One VGA Monitor
One USB Keyboard
One USB Mouse
Computer Side
Two HDB 15pin male to male VGA Cables
Two USB cable A male to B male cables
Four HDB 15pin male to male VGA Cables
Four USB cable A male to B male cables
Hardware Installation:
Please make sure all of peripherals and computers have been turned off before installation.
Connect the VGA cables, USB cables, to the computer ports of KVM switch.Connect the Keyboard, VGA monitor, Mouse, to console port of KVM switchAfter Powering on computers and finishing the boot-up process, you can start to go KVM switch.
Note:
Please do not switch the PC port ( i. e. Do not press the push button of KVM switch during the computers are under boot-up process.)
For 2 ports KVM switch. After bath Two PCs power on KVM can be switch
For 8 ports KVM switch. After Two PCs of Four PCs power on. KVM can be switch
Usage:
The push Button:
Pressing the button cyclically through all the ports.
Each 2 port KVM & 8 port KVM has separate push button on its panel.
You can press the buttons in order like mentioned-above diagram or also press the destination button you want directly.
Troubleshooting:
Ensure that all cables are well seated. Label all of cables with the number for each respective computer to avoid confusion.
KVM switch draws the power from USB port of computers. If the computer like laptop computer, notebook computer or the other computer can not support enough power to KVM switch, please add a DC5V, 500MA~1A to the power jack. The power jack polarity is center positive.Don`t press any keys on the keyboard while the selected computer is booting up. Otherwise, it might cause the keyboard error or keyboard is not detected at PC side.The computer boot up fine, but keyboard does not work. Make sure the keyboard works when directly plugged into the computer. Try a different keyboard but use only 101 102 or 104-keyboard.The mouse is not detected during PC boot up. Make sure the mouse works when directly plugged into the computer. Make sure the mouse is a true USB mouse.Avoiding moving the mouse or pressing the mouse buttons when switching the port.Notebook computer: Before powering on notebook computer, we recommend the user to connect the computer to emulation port (not link to console directly) first and then boot it up.