metal laser cutting machine
1.ball screw and the servo motor
2.AG Lamp Pump Solid Laser
3.fast speed and higher precision
500W Large format Gantry Solid Laser Cutting Machine’s Features:
1. Reasonable Gantry Structure, stable laser path
2. Mechanical Following laser cutting head imported from USA, has high sensitivity and good stability.
3. Power supply controlled by control cabinet, easy to operate
Precise and rational design, optical adjustment for easy lamp and rod replacement Japanese Panasonic servo motor to improve the cutting speed and stability. The combine of high precision ballscrews drive system and advanced feed system.High power and big refrigerating capacity water chiller.Advantages of Large format gantry DW solid laser cutting machine
1. High precision in cutting. Excellent in stability.
2. High quality in cutting edge
3. Cutting large format and suitable for cutting more material.
4. Drawer and air valve for conveneintly work.
5. High performance-price ratio
6. Low cost for using
7. Higher cutting speed and efficiency
8. Low fees for the future maintain
Assisit air :
A gas assist through the metal cutting optics nozzle, is needed to pierce through the
metal and allows for a clean, smooth cut edge. The use of oxygen or nitrogen allows many
metals to be cut with a dross free edge, no deburring required. A lower piercing gas assist
pressure can be set in the software to minimize the chance of pierce blowouts in thicker metals
| DW1325 |
Working area : | 130*250cm |
Laser power : | 500w |
Laser type : | YAG solid-state laser optical system |
laser wave length | 1064nm |
max Cutting speed : | 2m/min |
Power supply : | 380V/50HZ-60HZ |
Laser power injection | 18KW |
Water chiller power | 5HP |
X-axis and Y-axis Location accuracy | ±0.05mm |
X-axis and Y-axis repeat location accuracy | +- 0.05mm |
Fast moving speed | 5m/min |
Min. cutting line width | 0.18mm |
Transmission Method | servo and the ball screw |
Pulse frequency | 1-300HZ |
control system | Offline Motion Control |
gross weight | 2.5ton |
: