Laser Chiller is the indispensable part of laser equipments,such as laser engraving machine,laser cutting machine.
Laser Chillers are the indispensable part of laser equipments,such as laser engraving machine,laser cutting machine.
Technical Parameters of AL Series Laser Chiller
Model Item | AL-3W | AL-5W | AL-6W | AL-8W(D) | AL-10W(D) | ||||||
nominal cooling capacity | kcal/h | 6803 | 11094 | 13089 | 17604 | 22188 | |||||
kw | 7.91 | 12.9 | 15.22 | 20.47 | 25.8 | ||||||
input power | kw | 3.33 | 5.8 | 6.33 | 9.25 | 10.37 | |||||
power supply | 3PH~380V 50HZ | ||||||||||
refrigerant | type | R22 | |||||||||
type of control | capillary | ||||||||||
compressor | type | hermetic scroll (piston) | |||||||||
power(kw) | 2.8 | 4.66 | 5.2 | 3.8×2 | 4.66×2 | ||||||
condenser | type | finned copper tube + low noise outer rotor fan | |||||||||
cooling air flow (m3/h) | 3000 | 5000 | 6000 | 8000 | 10000 | ||||||
evaporator | type | water tank with coil | |||||||||
chilled fluid flow(m3/h) | 1.36 | 2.22 | 2.6 | 3.52 | 4.44 | ||||||
volume(L) | 50 | 70 | 70 | 120 | 200 | ||||||
inlet and outlet pipe diameter (inch) | 1 | 1 | 1 | 1 | 1-1/2 | ||||||
drain | 1/2 | ||||||||||
pump | power (kw) | 0.55 | 0.55 | 0.55 | 0.75 | 0.75 | |||||
lift(m) | 22 | 22 | 22 | 25 | 25 | ||||||
flow switch |
| ||||||||||
safety protection | compressor over temperature, over current, high and low pressure, over temperature,flow Switch, phase sequence, phase-missing, exhaust overheating, antifreezing | ||||||||||
weight | kg | 135 | 175 | 180 | 310 | 450 | |||||
dimension | mm | 930*520*970 | 1140*560*1040 | 1140*560*1040 | 1310*720*1270 | 1680*810*1280 | |||||
Note: 1. nominal cooling capacity is according to: Inlet chilled fluid temperature: 12 Outlet chilled fluid temperature: 7 Inlet cooling air temperature: 30 Outlet cooling air temperature: 35 2. working range: The temperature range of chilled fluid is from 5 to 35; Temperature difference between inlet and outlet chilled fluid is from 3 to 8. The machine should be used when the ambient temperature at or below 35. We reserve the right to modify the above dimensions or parameters without further notice. | |||||||||||