1.gold Jewelry laser welding machine
2.90J engergy
3.8 to10 years service life
4.24-hour continuous operation
5.ISO9001:2008
Gold laser welding machine,Jewelry ring laser welding
200W Small Jewelry ring laser welding machine is used for perforation and spot welding of sand hole for gold and silver jewelries.
By controlling parameters such as laser pulse width, energy, peak value and repeating frequency, the part will melt, and thus forming specific molten pools.
Due to its unique benefit, the laser welding machine has been successfully applied to gold and silver jewelries processing, and welding of small-sized parts.
Characteristics
1. Energy, pulse width, frequency and facula can be adjusted within a wide range to achieve different welding effects.
The parameters are adjusted by the control rod in the sealed cavity, simple and efficient.
2. Ceramic focusing cavity imported from the U.K. is employed, corrosion resistant, high temperature resistant, efficient in electrical / optical conversion.
3.The focusing cavity's service life is 8 to 10 years, and the service life of the xenon lamp is over 8 million times.
4. World-leading automatic light shielding system is employed to remove stimulation of light on eyes during operation.
5. 24-hour continuous operation, with stable operating performance, and free from maintenance within 10000 hours.
6. Personalized design in compliance with ergonomics principles.
Advantages
Fast, efficient, deep, little distortion, little affect area, quality welding, welding points free from pollution, and energy saving.
Specifications
Model ML-W200
Max.average power 200W
Laser wavelength 1064nm
Max Pulse energy 90J
Laser welding depth 0.1-3.3mm
The pulse width 0.3-20ms
laser welding frequency 0.5-20Hz
Adjusting scope of light spot 0.2-2mm
Control system Industrial computer
Power consumption ≤4kw
Electrical source 220V±10%/50Hz/30A
System composition and environmental
requirements system compostion ,Host computer, Cold water tank
Consumables
Xenon lamp, filter, protection lens, argon,water,electricity
Installation environment
Installation location,above 4 square meters
Environment
Clear,no dust or less dirt
Temperature
55F(13centidegree)to82F(28centidegree)
Humidity
5% to 75% No condensation
Electric power source
220V50HZ Alternating current,.30A airbrake switch ,voltage stability
