CW6180C series heavy horizontal lathe
1.The precision is stable.
2. the lathe can carry out strong force cutting.
TECHNICAL SPECIFICATION
Model | CW6180C |
Max.swing diameter of workpice over bed | 800mm |
Max:workpiece length | 1000mm 1500mm 3000mm |
Max.swing diameter of workpiceover tool-post | 520mm |
Spindle bore | 100mm |
Taper of spindle nose(metric) | 1:20 |
Range and steps of spindle speed | 6800rpm/min 18 steps |
Longitudinal and cross feeds | Each 64 kinds:0.124.3mm/r |
Rapid speed of carriage | 4000mm/min |
Cross-to-longitudinal feed rate | 1/2 |
Screw pitch of leadscrew | 12mm |
Number and range of metric thread | 50 kinds,1240mm |
Number and range of withworth thread | 26 kinds,141t.p.i |
Number and range of module thread | 53 kinds,0.5120mm |
Number and range of diametral pitch thread | 24 kinds,281t.p.i |
Max:travel of cross tool-post | 400mm |
Max:travel of upper tool-post | 200mm |
Tailstocks center sleeve bore | 100mm |
Travel of tailstocks center sleeve | 250mm |
Taper of tailstocks center sleeve | Morse No.5 |
Main motor power | 11kw |
Net weight | 4.4t 4.6t 5.6t |
Overall dimensions length | 3190mm 3690mm 5190mm |
Width | 1380mm 1425mm 1380mm |
Height | 1520mm |
STANDARD ACCESSORIES | OPTIONAL ACCESSORIES |
3 Jaw chuck (1 set) | 4 Jaw chuck Φ500mm(1 set) |
3 Jaw chuck base (1 set) | 4 Jaw chuck base(1Pce) |
Center and Sleeve (1set) | Steady rest Φ20mm-Φ170mm |
Pad (6sets) | Follower rest Φ20mm-Φ100mm |
