Bench lathe
Max. swing over bed 400~660mm
Max. swing over carriage 220~430mm
Max. swing over gap 700~910mm
Bench lathe Parameter
It can machine inner circle, outer circle, and end and head surface, taper surface. Gap lathe can process the deformation parts. Function is including the drilling and reaming. Metric, inch, diametrical pitch, module thread.The bed is made of high-grade cast iron The bed is undergoing surface quenching, the hardness can be HRC50.The noise can be under 83(A)
Item | CDE6240A | CDE6250A | CDE6266A | |
Max. swing over bed | 400mm | 500mm | 660mm | |
Max. swing over carriage | 220mm | 290mm | 430mm | |
Max. swing over gap | 700mm | 760mm | 910mm | |
Width of guide way | 394mm | |||
Dia. of spindle bore | 52mm | |||
Taper of center sleeve | Morse No.6 | |||
Spindle speed | 11-1400rpm/22speeds | |||
Longitudinal feed | 0.035-2.842mm/rev | |||
Cross feed | 0.009-0.804mm/rev | |||
Metric thread | 0.5-240(66) | |||
Whitemouth thread | 80-1/4(49)tpi | |||
Module thread | 0.25-120(57)mm | |||
Diametrical pitch thread | 160-7-16DP(50)mm | |||
Section of tool shank | 25×25 | |||
Travel of top slide | 150mm | |||
Max. travel of cross slide | 348mm | 348mm | 393mm | |
Pitch of longitudinal lead screw | 12mm | |||
Travel of tailstock center sleeve | 150mm | |||
Diameter of tailstock center sleeve | 75mm | |||
Taper of tailstock center sleeve | Morse No.5 | |||
Main motor power | 7.5kW(50Hz)/5.5kW(60Hz) | |||
Wooden case/Steel pallet Gross/net weight(kg) | 750mm | 2740×1150×1900/2580×1120×1610mm | ||
2770/2070 | 2820/2120 | 2928/2228 | ||
1000mm | 2990×1150×1900/2800×1120×1610mm | |||
2815/2120 | 2865/2170 | 2973/2278 | ||
1500mm | 3490×1150×1900/3300×1120×1610mm | |||
3905/2170 | 2955/2220 | 3063/2328 | ||
2000mm | 3990×1150×1900/3800×1120×1610mm | |||
2995/2280 | 3045/2330 | 3153/2438 | ||
3000mm | 4990×1150×1900/4800×1120×1610mm | |||
| 3245/2330 | 3493/2798 | ||
P.S: Photo provided by its manufacturing company
