High Configuration
heavy cutting available
high accuracy, long working life
Special machine tool frequency conversion motor
Main Configuration
1 Three claws chuck or imported hydraulic chuck.
2 Big board’s thick to 70 mm and meets the requirements of the heavy cutting.
3 The big board adopts film technique with good abrasive resistance improving mobile precision of the board. X direction adopts X three point supporting positioning structure,high accuracy and long working life.
4 Guide rail widened to 400 mm with highly rigidity improvement.
5 Three sections of mechanical transmission,reasonable gear set,Low speed great torque, suitable for heavy cutting
6 Special machine tool frequency conversion motor with base frequency 33.3HZ, Low-speed great torque,low temperature,Energy saving, and the highest rotation speed can reach 6000rmp.
7 Fit for 24 files mechanical transmission, and the lowest gear is 9rmp which can meet the special molds and processing requirement.
8 External independent oil tank can precipitate more effectively and the clean lubricating oil can improve the bearing accuracy and working life.
9 Main Axis hole diameter can reach 80 mm, high rigidity, and can machine large diameter rod material.
10 The flexible coupling is adopted between screw and servo motor improving the positioning accuracy and reducing transmission noise.
11 Special ball screw positioning bearing and precision lock nut, high accuracy, free maintenance and long working life.
12 Automatically lubricated device, both of the Injection time and oil supply can be arbitrary regulated, and the whole machine has 7 place automatic lubrication points and 11 place manual added lubricating points.
Specific Parameter
Item | unit | Parameters |
CK6150S | ||
The maximum gyration diameter on lathe bed | mm | 500 |
The maximum gyration diameter on X axle | mm | 260 |
The maximum clamping workpiece length | mm | 750/1000/1500/2000 |
Lathe bed guide rail wildth | mm | 400 |
Max.travel of board (X) | mm | 485 |
Max.travel (Z) | mm | 550/850/1350/1850 |
Spindle Hole diameter | mm | 80 |
Spindle inner cone specification | mm | GB/Φ90 |
Spindle front end specification |
| D8 |
Range od spindle speed | rpm | 0-1600 |
Main motor power | kw | 7.5 |
The tailstock sleeve cone hole specification |
| Mohs 5# |
The tailstock sleeve diameter | mm | 75 |
The tailstock sleeve route | mm | 175 |
Knife tool workstation |
| 4/6 station |
Height of tool center | mm | 25 |
X/Z axis repositioning precision
| mm | ±0.005 |
Processing roundness |
| 0.004 |
Processing roughness |
| Ra1.6 |
Dimension | mm | 2440*1260*1540/2690*1260*1540 3190*1260*1540/3690*1260*1540 |
Net weight | kg | 2650/2900/3100/3300 |
|