3HP engine lathe
Hardened and ground bed ways
Spindle speed 16 steps
Foot brake giving rapid braking
Emergency stop
Lathe Specs
Model | C6233A(GH1340A) | C6236A(GH1440A) |
Max. swing diameter over bed | 330mm (13″) | 356mm (14″) |
Max. swing diameter over carriage | 195mm (7-5/8″) | 220mm (8-5/8″) |
Max. swing diameter in gap | 480mm (19″) | 506mm (20″) |
Bed width | 20mm (8-1/8″) | |
Max. length of workpiece | 750mm (30″),1000mm (40″) | |
Spindle nose | D1-4 | |
Spindle bore | Ø38mm (1-1/2″) | |
Spindle taper of bore | MT 5 | |
Spindle number of speeds | 16 | |
Spindle speed range | 45~1800 r/min | |
Metric range/No. | 0.45~7.5mm/22 | |
Inch range/No. | 4~112T.P.I /44 | |
Range of longitudinal feed | 0.043~0.653mm/r (0.0012″~0.0294″) | |
Range of cross feed | 0.015~0.22mm/r (0.0003″~0.01″) | |
Diameter of leadscrew | 22mm (7/8″) | |
Pitch thread of leadscrew | 4mm (8T.P.I) | |
Max. travel of tailstock quill | 120mm (4-3/4″) | |
Diameter of tailstock quill | 45mm (1-25/32″) | |
Bore taper of tailstock | MT 3 | |
Power of main motor | 1.5kw, 2.4kw | |
Over dimension | 1920×740×1180mm | 1920×740×1180mm |
Packing dimension | 1930×760×1460mm | 2020×900×1560mm |
Net weigh | 700kg | 750kg |
Gross weight | 820kg | 880kg |
Standard accessories:
160mm 3 jaw chuck | Change gears |
200mm 4 jaw chuck | Face plate |
Reduction sleeve | Tool box and tools |
Dead center | Work light |
Chip pan | Full length splash guard |
Chasing dial indicator | Coolant system |
Follow rest | Steady rest |
Optional accessories:
Quick change tool post | Taper turning attachment |
Digital readout |
|
