Welcome to B2BAGE
seven inch LCD Touch screen with Tablet computer and GPS positioning seven inch touch panel manufacturers
seven inch LCD Touch screen with Tablet computer and GPS positioning seven inch touch panel manufacturers

Minimum Order: 0
Quality/Safety Certification: 0.00


seven inch LCD Touch screen with Tablet computer and GPS positioning seven inch touch panel manufacturers

Shenzhen xin jiejia Electronic Membrane Switch Co.,Ltd

SPECIFICATION 1)..Warranty Products manufactured to these specifications shall be capable of meeting all characteristics from HN-P070-20 delivery onwards or for a minimum period of 1 year of the customer received when stored and used as specified under normal conditions within the contents of these sheets. 2)..Scope This product is for Analog Resistance Type Touch Panel used as the input devices for mobile phone 3).. Features and General Specifications Type 4Analog Resistive Type Touch Panel Input Method Finger or special Pen Structure Shape, structure and dimension are referred to attached drawing Construction TOPCircuit+Bottom Circuit+Tail type Materials used  ITOFilm+ITO Glass+FPC Comment Bright side ITO Film ; Thickness: 0.188mm.hickness..1mm.onnector thickness..0±0.05mm Max voltage  5V(DC) Rated current Top layer 35mA,Bottom layer 35mA Terminal resistance  X direction  550Ω ~ 1000Ω Insulation resistance  20MΩ or over,DC25V Linearity  <1.5% Chattering Time  <10ms SHEN ZHEN XIN JIE JIA ELECTRONIC MEMBRANE SWITCH CO.,LTD Temperature and Humidity resistance Test(1)Store at 70°Cand 90% RH for 120 hours; (2) Keep at a room temperature for more than 24 hours; Heat Resistance (1)Store at 70°C for 120 hours; (2) Keep at a room temperature for more than 24 hours; Cold Resistance (1)Store at -20°C for 120 hours; (2) Keep at a room temperature for more than 24 hours Heat shook test  (1) -20°C(60min)→70°C(60min) total 10 cycles; (2) Keep at a room temperature for more than 24 hours The requirements in “Operation force” of the item “6 Mechanical characteristics” and “8 Electric characteristics” shall be satisfied Tapping testingTapping more than 1million times with 150g force and 2times/s frequency byφ2 rubber testing head, whose hardness is 60°(1)

Pen sliding testing:

(1)The sliding place should be more than 3mm inside from the boundary of active area.)

(2)Sliding more than 100 thousand times with 150g force and 2times/s frequency in the same position (10- 100mm) by φ2.0Polyacetal pen

Flexible pattern

heat seal Peeling

strength 

Flexible pattern heat seal Peeling strength:

(1)   X  2000g (peeling by 180°)

Y 500g (peeling upward by 90°) 

Flexible pattern heat resistance to soldering:Manual soldering shall be done at temperature 260 °C Max. For 3 s Max. Only one time reordering is allowed for reworking. Soldering iron with 60 W Max(Tip diameter: φ1 mm Max.)

 Flexible pattern bending resistance:Bending 3 times or more by bending radius R1mm

 

The requirements in “Terminal resistance” of the ite item “8. Electric characteristics” shall be satisfied. 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.