1.warranty10years!
2.Environmental protection, does not contain mercury
3.Flexible led strip
4.CE
5.COLOR:WARM WHITE/WHITE
we can provide 1.5w-30W LED bulb lamp, or do the OEM
1. Product Parameter
power | 8w |
The number of chips | 8PCS |
Luminous Efficiency | 85.93LM/W |
Luminous Flux | 128.9LM |
Color | Warm white/White |
Voltage | AC180-240V50-60Hz |
Base specifications | E27/E14/B22 |
Shell material | fireproof PC) |
Lamination Distance | Luminance values |
IM | 7.8LUX |
2M | 2.5LUX |
Dimensions | 42*H118mm |
Project | LED Light Pipe | Traditional Light Pipe |
Service Life | Semiconductor (LED) chips emitting light, free of filament, free of glass bulb, solid state packaging, a sort of cold light source. It’s convenient to transport and installation. It can be mounted in any micro and enclosed equipment,regardless of vibration. Heat dispersion may be omitted basically. It’s not breakable. The service life can be as long as 50,000 hours. | With regard to conventional fluorescent lamps, the service life of homemade ones is usually less than 3000 hours because of quality and technical problems. Among the imported ones, Philips is the best, whose service life can reach 3000~4000 hours. One LED lamp is equal to ten conventional fluorescent lamps. The maintenance expense and corresponding inconvenience are the most obvious contrast.
|
Diathermaneity
|
Semiconductor (LED) lamp is shockproof, and has no UV as well as IR radiation, also has no smash problem like traditional light pipe, has no harm and radiation to human body, too. | Conventional fluorescent lamp uses fragile glass housing and contains micro elements like Hg, Na, Xe and getter, which are harmful to human body to a small extent and also radiant.
|
Environmental Protection
|
Semiconductor (LED) lamp is free of harmful elements like Hg and Xe, which is beneficial to recovery. Moreover, it will not generate electromagnetic interference. |
Conventional fluorescent lamp contains harmful elements like Hg and Xe, which are unbeneficial to recovery. Moreover, it needs electronic ballast to start. This will generate electromagnetic interference and radiation. |
Vision Factors |
Semiconductor (LED) lamp adopts DC driving, free of frequency flash, so it has no impact on eyesight.
|
Conventional light pipe adopts AC driving and surely will generate frequency flash. This is easily to result in eyesight fatigue and weakening. Its impact on eyesight is huge. |
Efficiency of light
|
Semiconductor (LED) lamp has a high light efficiency and low heat generation. 90% of its electric energy is converted to visible light.
|
Conventional fluorescent lamp converts 60% of electric energy to heat energy, but only 40% to light energy. Its heating effect is very strong.
|
Safety Factors | The safety coefficient of semiconductor (LED) lamp is high. Its voltage, current and heat generation are all low, which will not create any hidden danger. |
The safety coefficient of conventional fluorescent lamp is relatively low. Its voltage, current and heat generation are also high, which is likely to cause hidden dangers.
|
Lamp Cap | With general standard lamp holder, it can directly replace the existing bulbs. | It uses the general standard lamp holder.
|
Switch Performance | It’s workable at high-speed condition and applicable to frequent turn-on or turn-off. |
Conventional light pipe is easily to get dark and unusable after frequent turn-on and turn-off. The service life is not long.
|
Warranty Claims | For the semiconductor (LED) lamp, we guarantee three years’ replacement and ten years’ repair. | Conventional light pipe has no guarantee service. |
Energy-efficient
| Like the comparison below: | Like the comparison below: |