1)Our LED tube lights use Cree or Nichia LEDs as light sources.
2)T8 tube light
3)T5 tube light
4)led tube light
LED Tube light
Pictures:
Features & benefits:
Our LED tube lights use Cree or Nichia LEDs as light sources.Energy Saving up to 80% than traditional fluorescent lamp;No RF interference, no buzzing noise and no fluorescent flickeringConstant current and minimize the light decrease10 times longer than fluorescent lampEasy installation and no maintenance
Suggested applications:
LED tube lights can be widely used in hotel, home, office, mall, parking lots, warehouse, supermarket, factory, advertising light box and so on.
Parameter:
Series | Model | Dimension | Lux | Power (W) | Voltage | Operation Temp | Color Temp | Light Degree | LED Quantity |
T5 | T506-09 | φ16*600mm | 300 | 9 | AC185 — 265V | -20°C — 50°C | Cold Light 5000-6000K Warm Light 3000-4000K | 120° | 88 |
T512-15 | φ16*1200mm | 300 | 15 | 176 | |||||
T8 | T806-09 | φ26*600mm | 300 | 9 | 110 | ||||
T809-15 | φ26*900mm | 300 | 15 | 165 | |||||
T812-20 | φ26*1200mm | 300 | 20 | 220 | |||||
Color Render:80 9W=20W 15W=40W Lift tiem:6H/D=15 years |
Dimension:
T5 Wiring Diagram:
Note Because the diameter of T5 is too small,The power supply is located outside. The wiring is different from T8 tube.
T8 Wiring Diagram
Wiring Diagram for inside power supply
Installation instruction
A Replacing fluorescent lamps (electronic rectifier)
Step1. Power off
Step2.Take off electronic rectifier
Step3.Connect A and B together and connect C and D together (See diagram)
Step4.Connect LED tube with E and F. (See diagram)
B Replacing fluorescent lamps (inductive rectifier)
A) Replace the fluorescent light with LED tube light directly
Step1.Power off
Step2.Take off Starter
Step3.Take off fluorescent light and put on LED tube light
B) Energy saving (Save more then 10VA)
Step1.Power off and take off fluorescent light
Step2.Take off Starter and Inductive Rectifier
Step3.Cut off b and connect to a.