On-Camera LED Video Light
1)Super brightness 70 LED'S
2)Color Temperature: 5500K
On-Camera LED Video Light
Included in the kit:
A. LED 70 Video Light
B. 110/220 volt AC & USB Charger
C. Built in Lithium 2500 mah Rechargeble Battery
D. Silver 4 leaf Barndoor
E. 5PCS Diffuser(White,Yellow,Blue,Green,red,)
F. User Manual
Charging the Battery
Assure the LED 70 light is turned OFF. Plug the AC adaptor into an AC outlet of either 110 or 240 volts. Then connect one of the USB ports on the DUAL USB charging cord to the AC adaptor and the small USB connector into the USB port on the back panel of the light.
The DUAL USB charging cord can be used with a computer with 2 USB ports to charge the LED 70 light. Using 2 USB ports will charge the light faster.See the Picture below:
To monitor the charge status, press the TEST button.
5 lights = 100%
4 lights = 80%
3 lights = 60%
2 lights = 40%
1 light = recharge battery now
AC Adaptor with DUAL USB charging cord
A fully charged battery will operate the light for about 2 hours continuous. The battery life is extended when the light is used with a reasonable duty cycle like 30-50%. The battery will recharge to 80% capacity from the AC adaptor in about 1.5 hours.
Setup and Usage:
The shoe mount attaches to the light with an articulated bracket. You can loosen the 2 screws on the bracket and adjust the position of the light as required.5PCS diffuser for your potion.