[2010 new patend] LED hand crank flashlight, China [2010 new patend] LED hand crank flashlight Supplier,Factory

[2010 new patend] LED hand crank flashlight

Ningbo Aladdin Lighting Co., Ltd. [China]

Minimum Order: 0

Quality/Safety Certification: 0.00

[2010 new]LED wind up torch
3 super LED for desk lamp
USB recharge lamp
Cranking energy to charge the battery

[Patent Product] 2010 new 2in1 led wind up torch

Item No.: PD603

This product adopts 3-phase brushless generator and solar panel for power generation to charge its inside 250mAh/3.6V chargeable lithium battery after commutating. The power stored is transformed to the LEDs via switch to be used for lighting. With a Torch Switch to control the model: desk lamp--torch--Off.

Specification:
Bulb type: 1 super bright LED for torch and 3white LED for desk lamp
Battery type: 3.6V 250mAh rechargeable Lithium battery
Working mode: desk lamp--torch--Off
LED lighting time: 3hours when fully charged
Charging/discharging circle: appox. 500 times under normal condition
Material(main body): ABS
Light weight size convenient to carry

1) Main Technical Parameters:

The Max. Luminous flux for table lamp	≥12 Lm
The Max. beam luminous intensity for table lamp	≥ 50000mcd
The Max. Luminous flux for torch	≥15 Lm
The Max. beam luminous intensity for torch	≥ 60000mcd
Working time for torch after full charged	≥8hour
Working time for torch after full charged	≥10hour
Lighting time after 1 minute cranking(3LED)	≥12 Minutes
Lighting time after 1 minute cranking(1 Super bright LED)	≥8 Minutes
Lighting distance(Center point luminous intensity 0.2lux)	≥10m
LED lifetime	≥100000 Hours
Full charging time by USB adaptor	≥4hours
It provides 3~8 minutes’ talking time to mobile phone by cranking 3 minutes

2) Main parts life-span:

Switch	≥10000 Times
The whole unit	≥5 Years
The plastic part	≥5 Years

3) Size and Weight:

Product size	43.543145mm
Product weight	92g

4) Others:

Specification of built-in battery	Chargeable lithium battery,250mAh, 3.6V
Motor	1.5W
Material of main body	ABS

Charging operation:

Cautions:

Don’t point at eyes directly so as not to hurt the eyes.

Pay attention to the holding gesture when cranking so as not to hurt your fingers.

In order to assure the using life of the battery and the mechanical parts, please pay attention to the instructions below:

a) When the light is dim, it means the battery is lack of power badly, please turn off the light or crank it for a while.

b) please crank it for at least 1 minute once a month.

Do not place this product in where temperature or humidity is high.

Do not drop or hit this product.

The product will be a little heated when cranking for a long time.

We reserve the right to change the specifications of the hardware and software described in this manual without prior notice.

Picture description: