Power

1.5W

The number of chips

36PCS

Luminous Efficiency

108LM/W

Luminous Flux

162LM

Color

Pure White/ Warm White

Voltage

AC180-240V/50-60Hz

Base specifications

E27/E14/B22

Shell Material

ABS(LU94V-2

   Lamination Distance

Luminance values

1M

25.5LUX

2M

6.7LUXmm×H68mm

Dimensions

φ46.5

Project

LED Light Pipe

Traditional Light Pipe

Service Life

Semiconductor (LED) chips emitting light, free of filament, free of glass bulb, solid state packaging, a sort of cold light source.  It’s convenient to transport and installation. It can be mounted in any micro and enclosed equipment,regardless of vibration.  Heat dispersion may be omitted basically. It’s not breakable. The service life can be as long as 50,000 hours.

With regard to conventional fluorescent lamps, the service life of homemade ones is usually less than 3000 hours because of quality and technical problems. Among the imported ones, Philips is the best, whose service life can reach 3000~4000 hours. One LED lamp is equal to ten conventional fluorescent lamps. The maintenance expense and corresponding inconvenience are the most obvious contrast.

Diathermaneity

Semiconductor (LED) lamp is shockproof, and has no UV as well as IR radiation, also has no smash problem like traditional light pipe, has no harm and  radiation to human body, too.

Conventional fluorescent lamp uses fragile glass housing and contains micro elements like Hg, Na, Xe and getter, which are harmful to human body to a small extent and also radiant.

Environmental Protection

Semiconductor (LED) lamp is free of harmful elements like Hg and Xe, which is beneficial to recovery. Moreover, it will not generate electromagnetic interference.  

Conventional fluorescent lamp contains harmful elements like Hg and Xe, which are unbeneficial to recovery. Moreover, it needs electronic ballast to start. This will generate electromagnetic interference and radiation.

Vision Factors

Semiconductor (LED) lamp adopts DC driving, free of frequency flash, so it has no impact on eyesight.

Conventional light pipe adopts AC driving and surely will generate frequency flash. This is easily to result in eyesight fatigue and weakening. Its impact on eyesight is huge.

Efficiency of light

Semiconductor (LED) lamp has a high light efficiency and low heat generation. 90% of its electric energy is converted to visible light.

Conventional fluorescent lamp converts 60% of electric energy to heat energy, but only 40% to light energy. Its heating effect is very strong.

Safety Factors

The safety coefficient of semiconductor (LED) lamp is high. Its voltage, current and heat generation are all low, which will not create any hidden danger. 

The safety coefficient of conventional fluorescent lamp is relatively low. Its voltage, current and heat generation are also high, which is likely to cause hidden dangers. 

Lamp Cap

With general standard lamp holder, it can directly replace the existing bulbs.

It uses the general standard lamp holder.

Switch Performance

It’s workable at high-speed condition and applicable to frequent turn-on or turn-off.

Conventional light pipe is easily to get dark and unusable after frequent turn-on and turn-off. The service life is not long.