High Voltage LED Strip
1.AC110V or AC220V
2.SMD5050, 60Led/meter, 14.4W
3.No need power supply
4.Max usage length: 100meter

 High Voltage LED Strip Light

SMD5050, 60Led/meter, 14.4W

New Features:  

1. Directly contact to AC110V or AC220V, no need power supply

2. The maximum length of SMD3528 new generation strip could be 200m without  pressure drawdown, while SMD5050 could reach to 100m with single power supply cable.

New Advantages:

1.  Easy installation and save cost on power supply

2.  Transparent PVC house, high transmittance, bent resistance

3.  Flattening appearance, small volume

New Package:

Inner Roll + Exterior Carton

100 meters per roll for SMD3528 strips

50 meters per roll for SMD5050 strips

Any length is available according to your requirement.

New Installation:

1. Install:

Take out the package, make sure it comes with necessary accessories, which include fixing clips, middle plugs, end caps and head wires. Fix the strips with clips onto where you need, put the wire into sockets to light the strips.

2. Cut:

1). The strip can be cut into different lengths for clients requirement.

But please make sure do not to cut at random in order to keep all the strip working .

2). The transverse section must be tidy,and don’t leave any burr,in order to prevent the strip from circuit short.

3). After the strip to be cut off ,must block up the end with end caps,also seal with enough glue at the connecting places.

3. Connect:

1). Power cord front ends connection way;

2). Intermediate head connection way:

Plug the head wire into a strip to conduct the electricity or plug a middle plug into the ends of two separate strips to connect them into a long strip, after being connected, seal all the plugs with enough glue;

3). Use end cap to block up the cutting ends:

Block up the end with end caps, seal with enough glue to make sure it’s still waterproof.

Products:

Photos: