LED flexible strip
1.SMD3528,120leds/m
2. DC12V, 9.6W/M
3.Color: red,green,blue,yellow,white, pink,purple

New Product Preview(High Voltage 220V/110V strip)

 

 

LED flexible strip (120led/meter)

 

Specification: 

Model No:	SL-ST3528W120
LED Type	SMD3528
LED Qty	120Leds/m
Working Voltage	DC12V
Power	9.6W
Size	5000*8mm
Emitting Angle	120°
IP rating	IP33,IP65,IP68
Package	5 meters/reel
Certification	CE and RoHS
Available color	red,green,blue,yellow,white,warm white,cold white,pink,purple

 

Features:

Super bright SMD3528 top LED, high intensity and reliability. Cuttable every 3 LEDs along the cutting marks, according to pratical requirement. Long life span 50,000+ hours Flexible ribbon for curving around bends Completely smooth and even light spread, solving the uneven luminous problem Ultra-bright but running at low temperature Self-adhesive back with 3M double side adhesive tape Certification: CE & RoHS  Low power consumption

 

Application:

Widely used for home decoration use, hotels, clubs, shopping malls Architectural decorative lighting, boutique atmosphere lighting Extensively applied in Backlighting, concealed lighting, channel letter lighting Emergency & security lighting, advertisement sign lighting Decorative lights for holiday, event, show exhibition Applicable for automobile and bicycle decoration, border or contour lighting

 

Assembly Information:

  

1 Solder connection should only be performed on designated solder pads (marked “ +/-”). During soldering, don’t exceed the maximum soldering time of 10 seconds and the maximum soldering temperature of 260 celsius degrees.2 The smallest unit (3 LEDs) can be removed by cutting with scissors between the designated solder pads.3 The mounting of the strip is facilitated by means of the double-sided adhesive on the back-surface of the strip. Care must be taken to provide a clean and dry mounting surface, free of oils or silicone coatings as well as dirt partied. The mounting substrate must have sufficient structural integrity. Take care to completely remove the adhesive backing. Once the strip is appropriately positioned, press on the strip with about 20N/cm2 (refer to application techniques of 3M adhesive transfer tapes).4 The minimum bending radius is 2 cm. The strip may be bent over a smaller radius of the circuit board containing no electronic components and such bends should be made once and fixed in position to avoid cyclic fatigue.  

LED flexible strip
Model NO.	Product Description
	Color	LED Type	Led Qty (leds/m)	Voltage	Power	Emitting Angle	Size (mm)	Package	IP
SL-ST3528W120-R	Red	SMD3528	120	DC 12V	9.6W	120°	5000*8	5meters/reel	IP33 IP65 IP68
SL-ST3528W120-Y	Yellow
SL-ST3528W120-B	Blue
SL-ST3528W120-G	Green
SL-ST3528W120-W	White
SL-ST3528W120-WW	Warm White
SL-ST3528W120-PI	Pink
SL-ST3528W120-PU	purple

NEW TYPE IS COMING...