Dimmable LED driver
1. High Efficiency (up to 88%)
2. Build-in Active PFC
3. Constant Output Current
4. Waterproof (IP67)
Dimmable LED driver
1. Dimmable LED driver SHC35 SERIES SPECIFICATIONS
Model | Output Current (±5%) (mA) | Output Voltage (V) | Efficiency | No Load Output Voltage (V) | Ripple & Noise (V) | |
110V input | 220V input | |||||
SHC035-0350SW | 350 | 33~100 | 88.0% | 88.0% | 106 | 10 |
SHC035-0450SW | 450 | 26~78 | 87.0% | 87.0% | 83 | 8 |
SHC035-0700SW | 700 | 17~50 | 86.0% | 86.0% | 56 | 5 |
SHC035-1050SW | 1050 | 11~33 | 86% | 86% | 39 | 4 |
SHC035-1280SW | 1280 | 9~27 | 86% | 86% | 33 | 4 |
SHC035-1400SW | 1400 | 8~24 | 84% | 85% | 30 | 4 |
SHC035-1660SW | 1660 | 7~21 | 84% | 85% | 25 | 4 |
NOTE:
1. All specifications are typical at 25°C unless otherwise stated.
2. The “Efficiency” values are measured at full load, after the unit is thermally stabilized, otherwise they will be lower about 1%
3. The “Ripple & Noise” values are measured by 20MHz bandwidth oscilloscope and the output paralleled a 0.1uF ceramic capacitor and a 10uF electrolytic capacitor.
2. Dimmable LED driver ELECTRICAL SPECIFICATIONS
NOTE: 1. All specifications except “OTP” are measured at 25°C .
3. Dimmable LED driver SAFETY & EMC COMPLIANCE
Parameter | Standards |
Safety UL/c-UL, CE | UL8750, UL935, UL1012, UL1310 Class2 CSA-22.2 No.107.1, CSA-C22.2 NO.223-M91 Class2 EN61347-1, EN61347-2-13 |
EMI | EN55015, FCC Part 15 Class B, ANSI C63.4: 2009 |
EMS | EN61000-3-2, EN61000-3-3, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11, EN61547 |
4. Dimmable LED driver PRODUCTS INFORMATION
Parameter | Values |
Working Temp., Humidity | -35°C ~ +55°C; 10 ~ 100% RH non-condensing |
Storage Temp., Humidity | -40°C ~ +85°C; 5 ~ 100% RH |
MTBF | 470,000 hours |
Life Time | 85,000 hours |
Dimension | Inches (L*W*H) 6.77*1.36*1.67 |
Milimeters (L*W*H) 172*34.5*42.5 | |
Net Weight | 480g |