Welcome to B2BAGE
Flange Level Transmitter
Flange Level Transmitter

Model: CJBH-B Discription Fix it on container by pipe flange, it is suitable for measuring high temperature, high viscosity easy precipitation or strongly aggressive media.Level membrane component is plug-in or plane type.Flange Diameter is 3 Inch and 3 Inch.Pressure Grade is 150Ib and 300Ib. User can choose 316 stainless steel, hastelloy alloy or tantalum membrane depend on media. Technical Parameter Output: Analog: 2 wire 4-20 mADC; Digital; 2 wire 4-20mADC and utilize hard protocol procedure variable digital signals. Power Voltage: 12.5-45VDC Load Limit: Rmax depend on power voltage.Hart protocol requires load resistance less than 250Ω and no more than 600Ω Communication distance: MAX: 15Km, can connect to 15 units intelligent transmitters Output: 4 bit digital display, 5 bit LCD screen, pointer type Explosion-proof: ExiaIICT5; isolating explosion Zero Shift: ‘Zero’ point can be transferred positive or negative, but can’t exceed upper and lower limit and Max measure Range. Temperature Range: -20℃~85℃(When choose LCD indicator, it is -20℃~70℃) Media Temperature: -40℃~104 Static Pressure and one-way Over-pressure Range: 3.45KPa(absolute pressure)~31.2MPa(gauge) Relative Humidity: 5-98%RH Setup time: within 5 sec. Capacity variation: less than 0.16cm3 Damping adjustment: time constant 0.20-25 sec. Trouble Alarm: if sensor has troubles and it can automatic diagnosis and output 3.9 or 21.0Ma Configuration protection: in order to avoid of correcting the configuration datas of transmitter, can lock stored data by software or protection switch.

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.