Range: 0~1mH2O...200mH2O;
High accuracy to 0.1%FS;
Rigid and robust construction, IP68;
for liquid level static measurement
ULB6 series submersible liquid level transmitter is made from stainless steel with rigid and robust construction. The protection cap with a small hole not only protect the diaphragm, but also let the liquids contact the diaphragm freely. The exquisite sealing technology as well as good assembly techniques guarantee ULB6 level transmitter's outstanding quality & performance. The product has a waterproof cable with vent hose which is designed for submersible applications.
ULB6 series is designed with IP68 protection, it is widely applied in petroleum, chemical industry, medicine, metallurgy, hydrology exploration etc.
Features:
*Rigid and robust construction, IP68 protection
*Wide application scope, long service life
*Reversed polarity protection and current limiting protection
*Against thunder stroke, against radio-frequency interference
*Intrinsic safety, or flame-proof safety optionalSpeifications
Specifications
| pressure range | 0~1mH2O...200mH2O |
| overload pressure | 200%FS |
| output signal | 4~20mA, 0~5V, 0~10V, 1~5V |
| accuracy | 0.1%FS, 0.25%FS (standard), 0.5%FS |
| load resistance | RL = (U-12V)/0.02A (4~20mA current output) U-loop voltage (V) |
| long term stability | <0.2%FS/year |
| supply voltage | 12~36V |
compensated temperature range | 0~70°c |
| storage temperature range | -40~+100°c |
| temperature coefficient of zero | 0.25%FS/10°c |
| temperature coefficient of span | 0.25%FS/10°c |
| insulation resistance | 100MΩ@ 50VDC |
| electrical connection | φ7.6mm shielded cable with vent hose |
material of wetted part and housing | 1Cr18Ni9Ti |
| material of pressure membrane | 316L or tantalum |
| sealing | n-Butyronitrile or fluoro-rubber sealing ring |
