LC3144LD Intelligent Displacer Level Transmitter 1.Suitable for Small Range, Low Density process conditions
Measure range: liquid level: 0~5m density: 0~0.3 to 0~2.0g/cm3
Interface: density difference: 0~0.05 to 0~1.5g/ cm3
Accuracy: A class: ±0.2%FS; B Class: ±0.5%FS
Output: Analog--two wire 4~20mA DC;
Digital-- HART or FOXCOM Protocol;
FF Protocol.
Process temp.: -196~420°C Ambient temp.: -30~85°C
Safety class: Intrinsically safe: ExiaIICT1-4; Explosion-proof:ExdIIT1-T5
Enclosure: IP65 (NAME 4X)
Connection flange:
Material: carbon steel, 304SS, 316SS, 316L or on request
Model Table
LC3144LD | Intelligent Displacer Liquid Level (Interface )Transmitter | Model Number | |||||||||
| 1 | HART | Communication | ||||||||
2 | F. FIELDBUS | ||||||||||
3 | FOMCOM | ||||||||||
| 1 | Q235 steel | Body Material | ||||||||
2 | 321 SCS321 1Cr18Ni9Ti 1.4873 | ||||||||||
3 | 316Ti OCr18Ni12Mo2Ti 1.4571 | ||||||||||
4 | 316 SVS316 OOCr17Ni12Mo2 1.4401 | ||||||||||
5 | 316L SVS316L OOCr14Ni12Mo2 1.4435 | ||||||||||
6 | other material to be specified. | ||||||||||
| H | External displacer side-side mounted | Mounting | ||||||||
C | External displacer side-bottom mounted | ||||||||||
F | External displacer top-side mounted | ||||||||||
G | External displacer top-bottom mounted | ||||||||||
N | Internal displacer top mounted | ||||||||||
| 1 | For liquid level | Service | ||||||||
2 | For interface | ||||||||||
3 | For density | ||||||||||
| 4/4A | 2.5MPa/Class 150LB ANSI | Pressure | ||||||||
5/5A | 4.0MPa/Class 300LB ANSI | ||||||||||
6/6A | 6.3MPa/Class 600LB ANSI | ||||||||||
7/7A | 16.0MPa/Class 900LB ANSI | ||||||||||
8/8A | 32.0MPa/Class 1500LB ANSI | ||||||||||
9/9A | 40.0MPa/Class 2500LB ANSI | ||||||||||
| T1 | Normal temp.: -40°C~150°C | Process | ||||||||
T2 | High temp.: -150°C~420°C | ||||||||||
T3 | Low temp.: -196°C~40°C | ||||||||||
| O | no explosion-proof | Ex-proof Mark | ||||||||
D | explosion-proof : ExdIICT1~T6 | ||||||||||
E | Intrinsically safe: ExiaIICT1~T6 | ||||||||||
B | with safety barrier | ||||||||||
| 0 | without heating jacket | Optional Items | ||||||||
J1 | heating jacket / process conn. | ||||||||||
J2 | heating jacket / process conn.JB/T82.1-94 DN15 PN1.0 | ||||||||||
|
|
| Measure Range | ||||||||
|
| Medium Density | |||||||||
