high power led driver 200w
1)High Efficiency (up to 93%)
2)Build-in Active PFC (Typical 0.99)
3)Constant Output
constant current high power led driver 200W
SHC200 SERIES SPECIFICATIONS
Model | Output Current (±5%) (mA) | Output Voltage (V) | Efficiency | No Load Output Voltage (V) | Ripple & Noise (V) | |
110V input | 220V input | |||||
SHC200-0450SW | 450 | 267 ~ 444 | 91.0% | 93.0% | 467 | 13.3 |
SHC200-0700SW | 700 | 171 ~ 286 | 91.0% | 93.0% | 300 | 8.6 |
SHC200-1050SW | 1050 | 114 ~ 190 | 91.0% | 93.0% | 200 | 5.7 |
SHC200-1400SW | 1400 | 86 ~ 143 | 91.0% | 93.0% | 150 | 4.3 |
SHC200-1750SW | 1750 | 69 ~ 114 | 90.0% | 92.0% | 120 | 3.4 |
SHC200-2100SW | 2100 | 57 ~ 95 | 89.5% | 91.5% | 105 | 2.9 |
SHC200-2450SW | 2450 | 49 ~ 82 | 89.5% | 91.5% | 90 | 2.4 |
SHC200-2800SW | 2800 | 43 ~ 71 | 89.5% | 91.5% | 78 | 2.1 |
SHC200-3150SW | 3150 | 38 ~ 63 | 89.5% | 91.5% | 70 | 1.9 |
SHC200-3500SW | 3500 | 34 ~ 57 | 89.5% | 91.5% | 63 | 1.7 |
SHC200-4200SW | 4200 | 29 ~ 48 | 89.5% | 91.5% | 52 | 1.4 |
NOTE: 1. All specifications are typical at 25°C unless otherwise stated.
2. The “Efficiency” values are measured at full load, after the unit is thermally stabilized, otherwise they will be lower about 1%
3. The “Ripple & Noise” values are measured by 20MHz bandwidth oscilloscope and the output paralleled a 0.1uF ceramic capacitor and a 10uF electrolytic capacitor.